CVE-2014-4943

mediumPriorität · verfolgen · 39EPSS 0.021 · 82. PerzentilExploit · PoCEUUS

grimoire priorityP1 · Urgent

Exploitable?

Public exploit

2 exploits · PoC

Likely / severe?

2.10% (82nd) EPSS

CVSS 6.9 · medium

Is it mine?

453 products

Prüfe deine Angriffsfläche

Who says so?

4 sources

cnnvd · enisa_euvd · nvd · redhat_csaf

EPSS · bewertet 2026-10-27

The PPPoL2TP feature in net/l2tp/l2tp_ppp.c in the Linux kernel through 3.15.6 allows local users to gain privileges by leveraging data-structure differences between an l2tp socket and an inet socket.

Behebungen

Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.

Ein Hersteller-Fix ist verfügbar.

Behobenkernel-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-0:3.10.0-123.4.4.el7.src as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-0:3.10.0-123.4.4.el7.src as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-0:3.10.0-123.4.4.el7.src as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-0:3.10.0-123.4.4.el7.src as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-abi-whitelists-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-abi-whitelists-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-abi-whitelists-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-abi-whitelists-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-bootwrapper-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-devel-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-devel-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debug-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-common-ppc64-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-common-ppc64-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-common-s390x-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-common-s390x-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-devel-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-devel-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-doc-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-doc-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-doc-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-doc-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-headers-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-headers-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-headers-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-headers-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-headers-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-headers-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-kdump-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-kdump-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-kdump-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-kdump-devel-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-libs-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-libs-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-libs-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-libs-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-libs-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-libs-devel-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-libs-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-libs-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-libs-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-tools-libs-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0923
Behobenkernel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-abi-whitelists-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-abi-whitelists-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-abi-whitelists-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-abi-whitelists-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-bootwrapper-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-devel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-devel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-devel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-devel-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-devel-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debug-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-i686-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-i686-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-i686-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-i686-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-i686-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-i686-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-ppc64-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-ppc64-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-s390x-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-s390x-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-devel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-devel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-devel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-devel-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-devel-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-doc-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-doc-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-doc-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-doc-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-firmware-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-firmware-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-firmware-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-firmware-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-headers-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-headers-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-headers-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-headers-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-headers-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-headers-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-headers-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-headers-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-headers-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-kdump-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-kdump-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-kdump-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-kdump-devel-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0924
Behobenkernel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-bootwrapper-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-devel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-devel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debug-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-common-i686-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-common-i686-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-common-ppc64-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-common-ppc64-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-common-s390x-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-common-s390x-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-devel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-devel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-doc-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-doc-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-firmware-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-firmware-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-headers-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-headers-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-headers-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-headers-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-headers-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-kdump-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-kdump-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-kdump-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-kdump-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925
Behobenkernel-0:2.6.32-220.54.1.el6.src as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-0:2.6.32-220.54.1.el6.src as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-debug-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-debug-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-debug-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-debug-devel-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-debuginfo-common-x86_64-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-devel-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-doc-0:2.6.32-220.54.1.el6.noarch as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-firmware-0:2.6.32-220.54.1.el6.noarch as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenkernel-headers-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenperf-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenperf-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenperf-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenpython-perf-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenpython-perf-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Behobenpython-perf-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:1025
Workaroundkernel-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:3.10.0-123.4.4.el7.src as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:3.10.0-123.4.4.el7.src as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:3.10.0-123.4.4.el7.src as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:3.10.0-123.4.4.el7.src as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-abi-whitelists-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-abi-whitelists-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-abi-whitelists-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-abi-whitelists-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-bootwrapper-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-ppc64-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-ppc64-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-s390x-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-s390x-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-doc-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-doc-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-doc-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-doc-0:3.10.0-123.4.4.el7.noarch as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-kdump-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-kdump-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-kdump-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-kdump-devel-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-libs-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-libs-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-libs-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-libs-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-libs-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-libs-devel-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-libs-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-libs-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-libs-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-tools-libs-devel-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:3.10.0-123.4.4.el7.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:3.10.0-123.4.4.el7.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:3.10.0-123.4.4.el7.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.src as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-abi-whitelists-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-abi-whitelists-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-abi-whitelists-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-abi-whitelists-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-bootwrapper-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-i686-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-i686-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-i686-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-i686-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-i686-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-i686-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-ppc64-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-ppc64-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-s390x-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-s390x-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-doc-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-doc-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-doc-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-doc-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-firmware-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-firmware-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-firmware-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-firmware-0:2.6.32-431.20.5.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-kdump-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-kdump-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-kdump-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-kdump-devel-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-431.20.5.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-bootwrapper-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-i686-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-i686-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-ppc64-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-ppc64-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-s390x-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-s390x-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-doc-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-doc-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-firmware-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-firmware-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-kdump-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-kdump-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-kdump-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-kdump-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-220.54.1.el6.src as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-220.54.1.el6.src as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debug-devel-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-devel-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-doc-0:2.6.32-220.54.1.el6.noarch as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-firmware-0:2.6.32-220.54.1.el6.noarch as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundkernel-headers-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundperf-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Workaroundpython-perf-debuginfo-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)redhat_csaf
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.

cvss

Technischer Schweregrad, 0–10. Eine Zeile je Quelle.

7.2

010

Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen⚠ Quellen uneinig · medium–high · 6.2–7.2

v2.06.9mediumAV:L/AC:M/Au:N/C:C/I:C/A:Cprimary · NVD / NIST USAusnutzbarkeit 3.4 · Auswirkung 10

v2.06.2mediumAV:L/AC:M/Au:N/C:C/I:C/A:C/E:POCsecondary · CVSS-BT (t0sche)

v2.07.2highAV:L/AC:L/Au:N/C:C/I:C/A:Csecondary · Red Hat Product Security US

schwächen

Die CWE-Schwächeklassen, zu denen dies gehört.

CWE-269USprimär

Exploits (2)

Öffentlicher Proof-of-Concept- und Exploit-Code.

EDB-36267Linux Kernel 3.15.6 - PPP-over-L2TP Socket Level Handling Crash (PoC)PoC · exploit_db
redes-2015/l2tp-socket-bugEstudo e apresentação do bug CVE-2014-4943 para a disciplina MAC0448PoC · poc_in_github

betroffene Produkte (453)

Betroffene Produkte und Versionsbereiche.

n/a n/a≤ n/aenisa_euvdEU
debian debian linux= 7.0nvdUScpe:2.3:o:debian:debian_linux:*:*:*:*:*:*:*:*
linux linux kernel2.6.23 → 3.2.62nvdUScpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
linux linux kernel3.11 → 3.12.27nvdUScpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
linux linux kernel3.13 → 3.14.16nvdUScpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
linux linux kernel3.15 → 3.15.9nvdUScpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
linux linux kernel3.3 → 3.4.102nvdUScpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
linux linux kernel3.5 → 3.10.52nvdUScpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
opensuse opensuse= 11.4nvdUScpe:2.3:o:opensuse:opensuse:*:*:*:*:*:*:*:*
redhat enterprise linux server aus= 6.2nvdUScpe:2.3:o:redhat:enterprise_linux_server_aus:*:*:*:*:*:*:*:*
suse linux enterprise desktop= 11nvdUScpe:2.3:o:suse:linux_enterprise_desktop:*:*:*:*:*:*:*:*
suse linux enterprise server= 11nvdUScpe:2.3:o:suse:linux_enterprise_server:*:*:*:*:*:*:*:*
kernel-0:2.6.32-220.54.1.el6.src as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)alle Versionenfixedredhat_csafUS
kernel-0:2.6.32-220.54.1.el6.src as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)alle Versionenfixedredhat_csafUS
kernel-0:2.6.32-220.54.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)alle Versionenfixedredhat_csafUS
kernel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)alle Versionenfixedredhat_csafUS
kernel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)alle Versionenfixedredhat_csafUS
kernel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)alle Versionenfixedredhat_csafUS
kernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)alle Versionenfixedredhat_csafUS
kernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)alle Versionenfixedredhat_csafUS

20 von 453 angezeigt

Advisories (4)

Hersteller- und Ökosystem-Meldungen dazu.

RHSA-2014:0923Red Hat Security Advisory: kernel security update2014-07-23csaf · redhat_csafUS
Updated kernel packages that fix two security issues are now available for Red Hat Enterprise Linux 7. The Red Hat Security Response Team has rated this update as having Important security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section.
RHSA-2014:0924Red Hat Security Advisory: kernel security update2014-07-23csaf · redhat_csafUS
Updated kernel packages that fix two security issues are now available for Red Hat Enterprise Linux 6. The Red Hat Security Response Team has rated this update as having Important security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section.
RHSA-2014:0925Red Hat Security Advisory: kernel security update2014-07-23csaf · redhat_csafUS
Updated kernel packages that fix two security issues are now available for Red Hat Enterprise Linux 6.4 Extended Update Support. The Red Hat Security Response Team has rated this update as having Important security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section.
RHSA-2014:1025Red Hat Security Advisory: kernel security and bug fix update2014-08-06csaf · redhat_csafUS
Updated kernel packages that fix one security issue and one bug are now available for Red Hat Enterprise Linux 6.2 Advanced Update Support. The Red Hat Security Response Team has rated this update as having Important security impact. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available from the CVE link in the References section.

auch bekannt als (3)

Weitere Namen und Kennungen dieser Entität.

quellen

Welche Quellen diesen Datensatz belegen und wann.

cnnvd enisa_euvd nvd redhat_csaf NVD CVE.org MITRE

veröffentlicht 2014-07-19geändert 2026-06-17

verwandt (6,658)

Verwandte Einträge.

ID	Schweregrad	EPSS	ausnutzbar	veröffentlicht
CVE-2026-102490US	high7.8OT kritisch	0.86% (58th)	KEV	2026-09-30
Zammad packages built with packager.io (DEB and RPM) could have allowed a local attacker who already had file system write privileges as the unprivileged zammad service account to…
CVE-2026-84869US	—OT kritisch	0.92% (60th)	KEV	2026-09-08
A condition in the ScreenConnect client may allow files to be transferred and executed through an active remote session without authorization or Host confirmation in certain circum…
CVE-2026-46817US	—OT kritisch	12.3% (96th)	KEV	2026-05-28
Vulnerability in the Oracle Payments product of Oracle E-Business Suite (component: File Transmission). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable…
CVE-2026-21533US	—OT kritisch	4.18% (91st)	KEV	2026-02-10
Improper privilege management in Windows Remote Desktop allows an authorized attacker to elevate privileges locally.
CVE-2024-57726US	critical9.9OT kritisch	66.4% (99th)	KEV	2025-01-15
SimpleHelp remote support software v5.5.7 and before has a vulnerability that allows low-privileges technicians to create API keys with excessive permissions. These API keys can be…

+6653 weitere

Referenzen (69)

Externe Belege — Patches, Meldungen, Analysen.

scry

Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.

Kostenloser Scan