CVE-2014-3691
highPriorität · verfolgen · 31EPSS 0.017 · 77. PerzentilEUUSEPSS · bewertet 2026-10-27
Smart Proxy (aka Smart-Proxy and foreman-proxy) in Foreman before 1.5.4 and 1.6.x before 1.6.2 does not validate SSL certificates, which allows remote attackers to bypass intended authentication and execute arbitrary API requests via a request without a certificate.
Behebungen
Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.
Ein Hersteller-Fix ist verfügbar.
- Behobenforeman-0:1.6.0.51-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-0:1.6.0.51-1.el6sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-0:1.6.0.51-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-0:1.6.0.51-1.el7sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-compute-0:1.6.0.51-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-compute-0:1.6.0.51-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-gce-0:1.6.0.51-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-gce-0:1.6.0.51-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-libvirt-0:1.6.0.51-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-libvirt-0:1.6.0.51-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-ovirt-0:1.6.0.51-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-ovirt-0:1.6.0.51-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-postgresql-0:1.6.0.51-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-postgresql-0:1.6.0.51-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-proxy-0:1.6.0.33-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-proxy-0:1.6.0.33-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-proxy-0:1.6.0.33-1.el6sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-proxy-0:1.6.0.33-1.el6sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-proxy-0:1.6.0.33-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-proxy-0:1.6.0.33-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-proxy-0:1.6.0.33-1.el7sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-proxy-0:1.6.0.33-1.el7sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-vmware-0:1.6.0.51-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-vmware-0:1.6.0.51-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-agent-0:1.5.3-7.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-agent-0:1.5.3-7.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-agent-0:1.5.3-7.el6sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-agent-0:1.5.3-7.el6sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-agent-0:1.5.3-7.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-agent-0:1.5.3-7.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-agent-0:1.5.3-7.el7sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-agent-0:1.5.3-7.el7sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-installer-0:0.0.67-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-installer-0:0.0.67-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-installer-0:0.0.67-1.el6sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-installer-0:0.0.67-1.el6sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-installer-0:0.0.67-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-installer-0:0.0.67-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-installer-0:0.0.67-1.el7sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenkatello-installer-0:0.0.67-1.el7sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-0:2.4.4-1.el6sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-0:2.4.4-1.el6sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-0:2.4.4-1.el7sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-0:2.4.4-1.el7sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-admin-client-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-admin-client-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-admin-client-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-admin-client-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-0:2.4.4-1.el6sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-0:2.4.4-1.el6sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-0:2.4.4-1.el7sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-0:2.4.4-1.el7sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-child-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-child-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-child-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-child-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-common-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-common-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-common-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-common-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-parent-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-parent-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-parent-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-nodes-parent-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-0:2.4.4-1.el6sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-0:2.4.4-1.el6sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-0:2.4.4-1.el7sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-0:2.4.4-1.el7sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-admin-extensions-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-admin-extensions-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-admin-extensions-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-admin-extensions-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-plugins-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-plugins-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-plugins-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-plugins-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-tools-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-puppet-tools-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-0:2.4.4-1.1.el6sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-0:2.4.4-1.1.el6sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-0:2.4.4-1.1.el7sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-0:2.4.4-1.1.el7sat.src as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-admin-extensions-0:2.4.4-1.1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-admin-extensions-0:2.4.4-1.1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-admin-extensions-0:2.4.4-1.1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-admin-extensions-0:2.4.4-1.1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-handlers-0:2.4.4-1.1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-handlers-0:2.4.4-1.1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-handlers-0:2.4.4-1.1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-handlers-0:2.4.4-1.1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-plugins-0:2.4.4-1.1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-plugins-0:2.4.4-1.1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-plugins-0:2.4.4-1.1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-rpm-plugins-0:2.4.4-1.1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-selinux-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-selinux-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-selinux-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-selinux-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-server-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-server-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-server-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpulp-server-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-agent-lib-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-agent-lib-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-agent-lib-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-agent-lib-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-bindings-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-bindings-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-bindings-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-bindings-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-client-lib-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-client-lib-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-client-lib-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-client-lib-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-common-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-common-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-common-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-common-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-puppet-common-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-puppet-common-0:2.4.4-1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-puppet-common-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-puppet-common-0:2.4.4-1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-rpm-common-0:2.4.4-1.1.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-rpm-common-0:2.4.4-1.1.el6sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-rpm-common-0:2.4.4-1.1.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenpython-pulp-rpm-common-0:2.4.4-1.1.el7sat.noarch as a component of Red Hat Satellite Capsule 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenruby193-rubygem-fog-0:1.21.0-3.2.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenruby193-rubygem-fog-0:1.21.0-3.2.el6sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenruby193-rubygem-fog-0:1.21.0-3.2.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenruby193-rubygem-fog-0:1.21.0-3.2.el7sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenruby193-rubygem-foreman-tasks-0:0.6.9-1.2.el6sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenruby193-rubygem-foreman-tasks-0:0.6.9-1.2.el6sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenruby193-rubygem-foreman-tasks-0:0.6.9-1.2.el7sat.noarch as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenruby193-rubygem-foreman-tasks-0:0.6.9-1.2.el7sat.src as a component of Red Hat Satellite 6.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via Red Hat Subscription Management. Details on how to use Red Hat Subscription Management are available at https://access.redhat.com/articles/433903. NOTE: This update requires additional steps to complete beyond just installing new packages. To complete this update please follow the steps outlined below: To update your Satellite or Capsule with this or other errata please follow these instructions: SATELLITE SERVER I. Shut down all Satellite related services. During this time managed hosts will not be able to install packages or apply configuration, so plan accordingly. # katello-service stop Shutting down Katello services... Stopping httpd: [ OK ] celery init v10.0. ... II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite errata as well as any other pending updates (such as RHEL) to Satellite 6 server. Review the list of packages being updated and accept with Y/N III. Perform data migration # service mongod start # sudo -u apache pulp-manage-db # katello-service start # foreman-rake katello:reindex these steps may take some amount of time, let them run to completion. After the last command is complete your Satellite is ready for use. CAPSULE SERVER I. Stop all services: The Satellite Capsule currently lacks a wrapper utility to start/stop all associated services so they must be stopped manually. See this article to see how to stop all services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i stop; done II. update packages via yum # yum clean all # yum update This step will download and install any available Satellite Capsule errata as well as any other pending updates (such as RHEL) to Satellite 6 Capsule server. Review the list of packages being updated and accept with Y/N III. Perform data migration # sudo -u apache pulp-manage-db this step may take some amount of time, let it run to completion. III. Restart services: # for i in pulp_celerybeat pulp_resource_manager pulp_workers httpd foreman-proxy; do service $i start; done
https://access.redhat.com/errata/RHBA-2015:0054 - Behobenforeman-proxy-0:1.6.0.33-2.el6ost.noarch as a component of OpenStack Foremanredhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. For details on how to apply this update, refer to: https://access.redhat.com/articles/11258
https://access.redhat.com/errata/RHSA-2015:0287 - Behobenforeman-proxy-0:1.6.0.33-2.el6ost.src as a component of OpenStack Foremanredhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. For details on how to apply this update, refer to: https://access.redhat.com/articles/11258
https://access.redhat.com/errata/RHSA-2015:0287 - Behobenforeman-proxy-0:1.3.0-7.el6ost.noarch as a component of Red Hat Enterprise Linux OpenStack Platform 4.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. For details on how to apply this update, refer to: https://access.redhat.com/articles/11258
https://access.redhat.com/errata/RHSA-2015:0288 - Behobenforeman-proxy-0:1.3.0-7.el6ost.src as a component of Red Hat Enterprise Linux OpenStack Platform 4.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. For details on how to apply this update, refer to: https://access.redhat.com/articles/11258
https://access.redhat.com/errata/RHSA-2015:0288
cvss
Technischer Schweregrad, 0–10. Eine Zeile je Quelle.
Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen⚠ Quellen uneinig · medium–high · 5.8–7.5
schwächen
Die CWE-Schwächeklassen, zu denen dies gehört.
betroffene Produkte (144)
Betroffene Produkte und Versionsbereiche.
Advisories (3)
Hersteller- und Ökosystem-Meldungen dazu.
- RHBA-2015:0054Red Hat Bug Fix Advisory: Red Hat Satellite 6 server bug fix update2015-01-16csaf · redhat_csafUS
Updated the following packages to fix several bugs in Red Hat Satellite 6: foreman foreman-proxy katello-agent pulp pulp-nodes pulp-puppet pulp-rpm ruby193-rubygem-fog ruby193-rubygem-foreman-tasks packages. These packages are now available in Red Hat Satellite 6.
- RHSA-2015:0287Red Hat Security Advisory: foreman-proxy security update2015-03-03csaf · redhat_csafUS
Updated foreman-proxy packages that fix one security issue are now available for Red Hat Enterprise Linux OpenStack Platform Foreman. Red Hat Product Security has rated this update as having Important security impact. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available from the CVE link in the References section.
- RHSA-2015:0288Red Hat Security Advisory: foreman-proxy security update2015-03-03csaf · redhat_csafUS
Updated foreman-proxy packages that fix one security issue are now available for Red Hat Enterprise Linux OpenStack Platform 4.0. Red Hat Product Security has rated this update as having Important security impact. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available from the CVE link in the References section.
auch bekannt als (3)
Weitere Namen und Kennungen dieser Entität.
quellen
Welche Quellen diesen Datensatz belegen und wann.
Referenzen (20)
Externe Belege — Patches, Meldungen, Analysen.
- http://projects.theforeman.org/issues/7822cnnvd
- http://rhn.redhat.com/errata/RHSA-2015-0287.htmlcnnvd
- http://rhn.redhat.com/errata/RHSA-2015-0288.htmlcnnvd
- https://access.redhat.com/errata/RHBA-2015:0054cnnvd
- https://access.redhat.com/errata/RHSA-2015:0287cnnvd
- https://access.redhat.com/errata/RHSA-2015:0288cnnvd
- https://access.redhat.com/security/cve/CVE-2014-3691cnnvd
- https://bugzilla.redhat.com/show_bug.cgi?id=1150879cnnvd
Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.
Kostenloser Scan