CVE-2010-3904
highPriorität · handeln · 90OT-Risiko · kritischKEV · ausgenutztEPSS 0.159 · 97. PerzentilExploit · waffenfähigEUUShinzugefügt 2023-05-12beheben bis 2023-06-02
erforderliche Maßnahme The impacted product is end-of-life and should be disconnected if still in use.
EPSS · bewertet 2026-10-26
Linux Kernel Improper Input Validation Vulnerability
The rds_page_copy_user function in net/rds/page.c in the Reliable Datagram Sockets (RDS) protocol implementation in the Linux kernel before 2.6.36 does not properly validate addresses obtained from user space, which allows local users to gain privileges via crafted use of the sendmsg and recvmsg system calls.
Behebungen
Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.
Ein Hersteller-Fix ist verfügbar.
- Behobenkernel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-0:2.6.18-194.17.4.el5.src as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-0:2.6.18-194.17.4.el5.src as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-PAE-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-PAE-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-PAE-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-PAE-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-PAE-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-PAE-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-devel-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-devel-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-devel-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-devel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debug-devel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-common-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-common-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-common-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-common-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-common-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-common-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-debuginfo-common-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-devel-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-devel-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-devel-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-devel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-devel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-doc-0:2.6.18-194.17.4.el5.noarch as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-doc-0:2.6.18-194.17.4.el5.noarch as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-headers-0:2.6.18-194.17.4.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-headers-0:2.6.18-194.17.4.el5.i386 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-headers-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-headers-0:2.6.18-194.17.4.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-headers-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-headers-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-headers-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-headers-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-kdump-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-kdump-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-kdump-debuginfo-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-kdump-debuginfo-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-kdump-devel-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-kdump-devel-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-debuginfo-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-debuginfo-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-debuginfo-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-devel-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-devel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-xen-devel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0792 - Behobenkernel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-0:2.6.32-71.7.1.el6.src as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-0:2.6.32-71.7.1.el6.src as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-0:2.6.32-71.7.1.el6.src as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-0:2.6.32-71.7.1.el6.src as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-bootwrapper-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-devel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-devel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-devel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-devel-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-devel-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debug-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-common-i686-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-common-i686-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-common-i686-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-common-ppc64-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-common-s390x-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-common-x86_64-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-common-x86_64-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-common-x86_64-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-debuginfo-common-x86_64-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-devel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-devel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-devel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-devel-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-devel-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-doc-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-doc-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-doc-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-doc-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-firmware-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-firmware-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-firmware-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-firmware-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-headers-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-headers-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-headers-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-headers-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-headers-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-headers-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-headers-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-headers-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-headers-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-kdump-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-kdump-debuginfo-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenkernel-kdump-devel-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenperf-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenperf-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenperf-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Behobenperf-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2010:0842 - Workaroundkernel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.18-194.17.4.el5.src as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.18-194.17.4.el5.src as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-PAE-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-PAE-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-PAE-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-PAE-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-PAE-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-PAE-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-doc-0:2.6.18-194.17.4.el5.noarch as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-doc-0:2.6.18-194.17.4.el5.noarch as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.18-194.17.4.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.18-194.17.4.el5.i386 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.18-194.17.4.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-kdump-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-kdump-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-kdump-debuginfo-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-kdump-debuginfo-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-kdump-devel-0:2.6.18-194.17.4.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-kdump-devel-0:2.6.18-194.17.4.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-debuginfo-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-debuginfo-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-debuginfo-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-debuginfo-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-devel-0:2.6.18-194.17.4.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-devel-0:2.6.18-194.17.4.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-devel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-xen-devel-0:2.6.18-194.17.4.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.32-71.7.1.el6.src as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.32-71.7.1.el6.src as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.32-71.7.1.el6.src as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.32-71.7.1.el6.src as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-bootwrapper-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debug-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-i686-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-i686-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-i686-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-ppc64-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-s390x-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-devel-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-doc-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-doc-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-doc-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-doc-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-firmware-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-firmware-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-firmware-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-firmware-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.32-71.7.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.32-71.7.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-headers-0:2.6.32-71.7.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-kdump-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-kdump-debuginfo-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundkernel-kdump-devel-0:2.6.32-71.7.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundperf-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundperf-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundperf-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
- Workaroundperf-0:2.6.32-71.7.1.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
cvss
Technischer Schweregrad, 0–10. Eine Zeile je Quelle.
Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen
SSVC
Eine Handlungsentscheidung — aus Ausnutzung und Auswirkung.
schwächen
Die CWE-Schwächeklassen, zu denen dies gehört.
Exploits (4)
Öffentlicher Proof-of-Concept- und Exploit-Code.
- EDB-15285Linux Kernel 2.6.36-rc8 - 'RDS Protocol' Local Privilege Escalationfunktional · exploit_db
- redhatkaty/-cve-2010-3904-reportredhatkaty/-cve-2010-3904-reportPoC · poc_in_github
betroffene Produkte (111)
Betroffene Produkte und Versionsbereiche.
- suse linux enterprise real time extension= 11nvdUScpe:2.3:o:suse:linux_enterprise_real_time_extension:*:*:*:*:*:*:*:*
Advisories (2)
Hersteller- und Ökosystem-Meldungen dazu.
- RHSA-2010:0792Red Hat Security Advisory: kernel security update2010-10-25csaf · redhat_csafUS
Updated kernel packages that fix one security issue are now available for Red Hat Enterprise Linux 5. The Red Hat Security Response Team has rated this update as having important security impact. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available from the CVE link in the References section.
- RHSA-2010:0842Red Hat Security Advisory: kernel security and bug fix update2010-11-10csaf · redhat_csafUS
Updated kernel packages that fix multiple security issues and several bugs are now available for Red Hat Enterprise Linux 6. The Red Hat Security Response Team has rated this update as having important security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section. [Updated 22 November 2010] The packages list in this erratum has been updated to include four missing debuginfo-common packages (one per architecture). No changes have been made to the original packages.
auch bekannt als (2)
Weitere Namen und Kennungen dieser Entität.
quellen
Welche Quellen diesen Datensatz belegen und wann.
Referenzen (39)
Externe Belege — Patches, Meldungen, Analysen.
- http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git%3Ba=commit%3Bh=799c10559d60f159ab2232203f222f18fa3c4a5fenisa_euvd
- http://lists.opensuse.org/opensuse-security-announce/2010-10/msg00008.htmlenisa_euvd
- http://lists.opensuse.org/opensuse-security-announce/2010-11/msg00004.htmlenisa_euvd
- http://lists.opensuse.org/opensuse-security-announce/2011-02/msg00000.htmlenisa_euvd
- http://packetstormsecurity.com/files/155751/vReliable-Datagram-Sockets-RDS-rds_page_copy_user-Privilege-Escalation.htmlenisa_euvd
- http://secunia.com/advisories/46397enisa_euvd
- http://securitytracker.com/id?1024613enisa_euvd
- http://www.kb.cert.org/vuls/id/362983enisa_euvd
Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.
Kostenloser Scan