CVE-2005-1993

lowPriorität · verfolgen · 15EPSS 0.004 · 34. PerzentilEURUUS

grimoire priorityP3 · Track

Exploitable?

—

no known exploitation

Likely / severe?

0.40% (34th) EPSS

CVSS 3.7 · low

Is it mine?

98 products

Prüfe deine Angriffsfläche

Who says so?

4 sources

enisa_euvd · fstec_bdu · nvd · redhat_csaf

EPSS · bewertet 2026-10-28

Race condition in sudo 1.3.1 up to 1.6.8p8, when the ALL pseudo-command is used after a user entry in the sudoers file, allows local users to gain privileges via a symlink attack.

Behebungen

Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.

Ein Hersteller-Fix ist verfügbar.

Behobensudo-0:1.6.7p5-1.1.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.src as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.src as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.src as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.src as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.ia64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.ia64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.ia64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.ppc as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.s390 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.s390x as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.src as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.src as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.src as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.src as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.ia64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.ia64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.ia64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.ppc as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.s390 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.s390x as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Behobensudo-debuginfo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535

cvss

Technischer Schweregrad, 0–10. Eine Zeile je Quelle.

3.7

010

Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen

v2.03.7lowAV:L/AC:H/Au:N/C:P/I:P/A:Pprimary · NVD / NIST USAusnutzbarkeit 1.9 · Auswirkung 6.4

v2.03.7lowAV:L/AC:H/Au:N/C:P/I:P/A:Psecondary · FSTEC (BDU) RU

v2.03.1lowAV:L/AC:H/Au:N/C:P/I:P/A:P/E:Usecondary · CVSS-BT (t0sche)

schwächen

Die CWE-Schwächeklassen, zu denen dies gehört.

CWE-362USLLM-abgeleitetCWE-366USLLM-abgeleitet

betroffene Produkte (98)

Betroffene Produkte und Versionsbereiche.

n/a n/a≤ n/aenisa_euvdEU
Red Hat Inc. Red Hat Enterprise Linux≤ Desktop 4fstec_bduRU
Red Hat Inc. Red Hat Enterprise Linux≤ Desktop 3fstec_bduRU
Red Hat Inc. Red Hat Enterprise Linux≤ 3fstec_bduRU
Red Hat Inc. Red Hat Enterprise Linux≤ 2.1fstec_bduRU
todd miller sudo= 1.3.1nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.5.6nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.5.7nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.5.8nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.5.9nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.1nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.2nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3_p1nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3_p2nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3_p3nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3_p4nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3_p5nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3_p6nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*

20 von 98 angezeigt

Advisories (1)

Hersteller- und Ökosystem-Meldungen dazu.

RHSA-2005:535Red Hat Security Advisory: sudo security update2005-06-29csaf · redhat_csafUS
An updated sudo package is available that fixes a race condition in sudo's pathname validation. This update has been rated as having moderate security impact by the Red Hat Security Response Team.

auch bekannt als (5)

Weitere Namen und Kennungen dieser Entität.

quellen

Welche Quellen diesen Datensatz belegen und wann.

enisa_euvd fstec_bdu nvd redhat_csaf NVD CVE.org MITRE

veröffentlicht 2005-06-20geändert 2026-06-16

Referenzen (36)

Externe Belege — Patches, Meldungen, Analysen.

scry

Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.

Kostenloser Scan