CVE-2003-0464

mediumPriorität · verfolgen · 18EPSS 0.004 · 32. PerzentilEUUS
grimoire priorityP3 · Track
Exploitable?
—
no known exploitation
Likely / severe?
0.38% (32nd) EPSS
CVSS 4.6 · medium
Is it mine?
11 products
Prüfe deine Angriffsfläche
Who says so?
3 sources
enisa_euvd · nvd · redhat_csaf

EPSS · bewertet 2026-10-27

The RPC code in Linux kernel 2.4 sets the reuse flag when sockets are created, which could allow local users to bind to UDP ports that are used by privileged services such as nfsd.

01

Behebungen

Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.

Ein Hersteller-Fix ist verfügbar.

  • BehobenRed Hat Linux 7.1redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.

    https://access.redhat.com/errata/RHSA-2003:238
  • BehobenRed Hat Linux 7.2redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.

    https://access.redhat.com/errata/RHSA-2003:238
  • BehobenRed Hat Linux 7.3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.

    https://access.redhat.com/errata/RHSA-2003:238
  • BehobenRed Hat Linux 8.0redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.

    https://access.redhat.com/errata/RHSA-2003:238
  • BehobenRed Hat Linux 9redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.

    https://access.redhat.com/errata/RHSA-2003:238
02

cvss

Technischer Schweregrad, 0–10. Eine Zeile je Quelle.

4.6
010

Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen⚠ Quellen uneinig · low–medium · 3.9–4.6

v2.04.6mediumAV:L/AC:L/Au:N/C:P/I:P/A:Pprimary · NVD / NIST USAusnutzbarkeit 3.9 · Auswirkung 6.4
v2.03.9lowAV:L/AC:L/Au:N/C:P/I:P/A:P/E:Usecondary · CVSS-BT (t0sche)
03

schwächen

Die CWE-Schwächeklassen, zu denen dies gehört.

CWE-266USLLM-abgeleitetCWE-284USLLM-abgeleitet
04

betroffene Produkte (11)

Betroffene Produkte und Versionsbereiche.

05

Advisories (1)

Hersteller- und Ökosystem-Meldungen dazu.

  • RHSA-2003:238Red Hat Security Advisory: : : : Updated 2.4 kernel fixes vulnerabilities2003-07-21csaf · redhat_csafUS

    Updated kernel packages are now available fixing several security vulnerabilities. [Updated 28 August 2003] Added CAN-2003-0699 and CAN-2003-0700 to the list of security issues that are fixed by this advisory (there are no changes to the packages themselves).

06

auch bekannt als (2)

Weitere Namen und Kennungen dieser Entität.

07

quellen

Welche Quellen diesen Datensatz belegen und wann.

enisa_euvdnvdredhat_csafNVDCVE.orgMITRE
veröffentlicht 2003-08-27geändert 2026-06-16
08

Referenzen (4)

Externe Belege — Patches, Meldungen, Analysen.

scry

Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.

Kostenloser Scan