Multiple Cisco Products Snort 3 Visual Basic for Applications Buffer Overflow Denial of Service Vulnerability
A vulnerability in the Snort 3 Visual Basic for Applications (VBA) Decompression Engine of multiple Cisco products could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper range checking when Snort 3 decompresses VBA data, which is user controlled. An attacker could exploit this vulnerability by sending crafted VBA data to the Snort 3 Detection Engine of a targeted device. A successful exploit could allow the attacker to cause an overflow of stack data, which could result in a DoS condition. Cisco has released software updates that address this vulnerability. There is a workaround that addresses this vulnerability. This advisory is part of a group of advisories. For a complete list of the advisories and links to them, see Cisco Advance Notification for Publication of October 21, 2026, Security Advisories ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-notice-QGwHnJ6k"]. In addition, for further documentation of improvements and fixes in Open Source Snort 3, see Multiple Cisco Products Snort 3 Security Hardening Release: October 2026 ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-hardening-snort3-ybgmhTQe"].
beschreibt (1)
Zugehörige CVEs.
| ID | Schweregrad | ausnutzbar | ||
|---|---|---|---|---|
| CVE-2026-20218US | medium5.8 | — | ||
A vulnerability in the Snort 3 Visual Basic for Applications (VBA) Decompression Engine of multiple Cisco products could allow an unauthenticated, remote attacker to cause the Snor… | ||||
Referenzen
Externe Belege — Patches, Meldungen, Analysen.
- Security Vulnerability Policyexternal
- End of Life Announcement for Open Source Snort 2external
- Multiple Cisco Products Snort 3 Security Hardening Release: October 2026external
- Cisco Advance Notification for Publication of October 21, 2026, Security Advisoriesexternal
- Multiple Cisco Products Snort 3 Visual Basic for Applications Buffer Overflow Denial of Service Vulnerabilityself
- Cisco's Transition to a Risk-Based Vulnerability Disclosure Modelexternal
- Cisco Security Vulnerability Policyexternal
- Security Impact Rating (SIR)external
Behebungen (916)
- Behoben17.12.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.4a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.4b
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.5a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.5b
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.5c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.5d
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.7
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.7a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.7b
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.12.8
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.13.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.14.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.15.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.15.2a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.15.2c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.15.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.15.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.15.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.15.4c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.15.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.15.5a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.15.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.16.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.17.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.18.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.18.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.18.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben17.18.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben26.1.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben26.1.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.10.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.12.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.13.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.14.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.15.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.16.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.17.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.18.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.19.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.20.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.21.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.22.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.23.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.24.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.25.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.27.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.28.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.29.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.30.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.31.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.32.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.36.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.38.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.39.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.40.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.41.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.42.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.43.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.45.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.47.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.48.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.5.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.50.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.51.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.52.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.53.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.55.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.56.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.57.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.58.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.59.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.6.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.60.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.61.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.62.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.63.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.64.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.65.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.67.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.69.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.7.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.70.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.71.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.72.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.73.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.74.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.75.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.76.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.77.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.78.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.8.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.81.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.82.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.83.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.84.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.1.9.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.10.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.10.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.10.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.11.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.12.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.12.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.2.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.2.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3.5.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3.7.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.5.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.5.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.5.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.6.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.6.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.6.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.6.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.7.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.7.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.7.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.7.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.7.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.8.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.9.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.9.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.9.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.9.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.9.5.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.9.6.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.9.7.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 6100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Workaround17.12.1a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.2
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.3
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.3a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4b
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5b
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5c
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5d
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.6
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.7
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.7a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.7b
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.8
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.13.1a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.14.1a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.1a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.2a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.2c
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.3
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.3a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.4
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.4c
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.5
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.5a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.6
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.16.1a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.17.1
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.18.1a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.18.2
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.18.3a
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.18.4
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround26.1.1
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround26.1.2
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.10.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.12.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.13.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.14.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.15.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.16.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.17.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.18.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.19.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.2.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.20.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.21.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.22.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.23.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.24.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.25.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.27.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.28.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.29.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.3.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.30.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.31.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.32.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.36.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.38.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.39.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.4.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.40.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.41.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.42.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.43.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.45.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.47.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.48.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.5.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.50.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.51.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.52.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.53.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.55.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.56.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.57.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.58.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.59.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.6.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.60.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.61.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.62.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.63.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.64.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.65.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.67.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.69.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.7.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.70.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.71.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.72.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.73.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.74.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.75.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.76.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.77.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.78.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.8.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.81.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.82.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.83.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.84.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.9.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.10.0.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.10.1.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.10.2.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.11.1.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.12.1.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.12.2.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.1.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.2.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.0.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.1.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.2.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.3.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.4.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.5.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.7.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.0.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.1.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.2.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.0.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.1.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.2.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.3.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.0.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.1.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.2.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.3.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.4.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.8.1.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.0.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.1.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.2.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.3.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.5.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.6.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.7.0
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 6100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Advisories wie diese benennen die exponierten Produkte, die Angreifer auf Ihrer Angriffsfläche ins Visier nehmen. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.
Kostenloser Scan