SSA-661247

csafDEsiemens_psirt

SSA-661247: Apache Log4j Vulnerabilities (Log4Shell, CVE-2021-44228, CVE-2021-45046) - Impact to Siemens Products

Advisory ansehen veröffentlicht 2021-12-13

On 2021-12-09, a vulnerability in Apache Log4j (a logging tool used in many Java-based applications) was disclosed, that could allow remote unauthenticated attackers to execute code on vulnerable systems. The vulnerability is tracked as CVE-2021-44228 and is also known as "Log4Shell". On 2021-12-14 an additional denial of service vulnerability (CVE-2021-45046) was published rendering the initial mitigations and fix in version 2.15.0 as incomplete under certain non- default configurations. Log4j versions 2.16.0 and 2.12.2 are supposed to fix both vulnerabilities. On 2021-12-17, CVE-2021-45046 was reclassified with an increased CVSS base score (from 3.7 to 9.0). The potential impact of CVE-2021-45046 now includes - besides denial of service - also information disclosure and local (and potential remote) code execution. Siemens is currently investigating to determine which products are affected and is continuously updating this advisory as more information becomes available. See section Additional Information for more details regarding the investigation status. Note: two additional vulnerabilities were published for Apache Log4j, the impact of which are documented in SSA-501673: https://cert- portal.siemens.com/productcert/pdf/ssa-501673.pdf (CVE-2021-45105) and SSA-784507: https://cert- portal.siemens.com/productcert/pdf/ssa-784507.pdf (CVE-2021-44832).

01

beschreibt (2)

Zugehörige CVEs.

IDSchweregrad ausnutzbar
CVE-2021-45046UScritical9.0OT kritischKEV
It was found that the fix to address CVE-2021-44228 in Apache Log4j 2.15.0 was incomplete in certain non-default configurations. This could allows attackers with control over Threa…
CVE-2021-44228UScritical10.0OT kritischKEV
Apache Log4j2 2.0-beta9 through 2.15.0 (excluding security releases 2.12.2, 2.12.3, and 2.3.1) JNDI features used in configuration, log messages, and parameters do not protect agai…
02

Referenzen

Externe Belege — Patches, Meldungen, Analysen.

03

Behebungen (558)

  • MitigationAdvantage Navigator Energy & Sustainability

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationAdvantage Navigator Energy & Sustainability

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationAdvantage Navigator Software Proxy V6

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationAdvantage Navigator Software Proxy V6

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationBuilding Operator Discovery Distribution for the Connect X200 Gateway

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationBuilding Operator Discovery Distribution for the Connect X200 Gateway

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationBuilding Operator Discovery Distribution for the Connect X300 Gateway

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationBuilding Operator Discovery Distribution for the Connect X300 Gateway

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationBuilding Twin - 360° Viewer

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationBuilding Twin - 360° Viewer

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationCOMOS

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationCOMOS

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationCapital V2019.1

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationCapital V2019.1

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationCapital V2020.1

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationCapital V2020.1

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationCapital V2021.1

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationCapital V2021.1

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationCerberus DMS V5.0

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationCerberus DMS V5.0

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationCerberus DMS V5.1

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationCerberus DMS V5.1

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationDesigo CC V3.0

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationDesigo CC V3.0

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationDesigo CC V4.0

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationDesigo CC V4.0

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationDesigo CC V4.1

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationDesigo CC V4.1

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationDesigo CC V4.2

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationDesigo CC V4.2

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationDesigo CC V5.0

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationDesigo CC V5.0

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationDesigo CC V5.1

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationDesigo CC V5.1

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationE-Car OC Cloud Application

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationE-Car OC Cloud Application

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationEnergy Engage

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationEnergy Engage

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationEnergyIP

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationEnergyIP

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationEnergyIP Prepay

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationEnlighted Amaze

    For Comfy and Enlighted, see also chapter Additional Information below

  • MitigationEnlighted Amaze

    For Comfy and Enlighted, see also chapter Additional Information below

  • MitigationEnlighted Where

    For Comfy and Enlighted, see also chapter Additional Information below

  • MitigationEnlighted Where

    For Comfy and Enlighted, see also chapter Additional Information below

  • MitigationGMA-Manager

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationGMA-Manager

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationGeolus Shape Search V10

    Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8601468

  • MitigationGeolus Shape Search V10

    Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8601468

  • MitigationGeolus Shape Search V11

    Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8601468

  • MitigationGeolus Shape Search V11

    Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8601468

  • MitigationHEEDS Connect

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationHEEDS Connect

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationHES UDIS

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationHES UDIS

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationIndustrial Edge Hub

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationIndustrial Edge Hub

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationIndustrial Edge Management App (IEM-App)

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationIndustrial Edge Management App (IEM-App)

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationIndustrial Edge Management OS (IEM-OS)

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationIndustrial Edge Management OS (IEM-OS)

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationMendix Applications

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationMendix Applications

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationMindSphere App Management Cockpits (Developer& Operator)

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationMindSphere App Management Cockpits (Developer& Operator)

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationMindSphere Asset Manager

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationMindSphere Asset Manager

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationMindSphere IAM (User Management/ Settings)

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationMindSphere IAM (User Management/ Settings)

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationMindSphere Integrated Data Lake

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationMindSphere Integrated Data Lake

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationMindSphere Notification Service

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationMindSphere Notification Service

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationMindSphere Predictive Learning

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationMindSphere Predictive Learning

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationMindSphere Usage Transparency Service

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationMindSphere Usage Transparency Service

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationMindSphere Visual Explorer

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationMindSphere Visual Explorer

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationMindsphere Cloud Foundry

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationMindsphere Cloud Foundry

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationMindsphere Cloud Platform

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationMindsphere Cloud Platform

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationNX 1953 Series

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationNX 1953 Series

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationNX 1980 Series

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationNX 1980 Series

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationNX 2007 Series

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationNX 2007 Series

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationNXpower Monitor

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationNXpower Monitor

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationOpcenter EX CP Process Automation Control

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationOpcenter EX CP Process Automation Control

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationOpcenter Execution Core Process Automation Control

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationOpcenter Execution Core Process Automation Control

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationOpcenter Intelligence

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationOpcenter Intelligence

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationOperation Scheduler

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationOperation Scheduler

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSENTRON powermanager V4

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSENTRON powermanager V4

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSIGUARD DSA

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSIGUARD DSA

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSIMATIC IPC1047

    Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC

  • MitigationSIMATIC IPC1047

    Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC

  • MitigationSIMATIC IPC1047E

    Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC

  • MitigationSIMATIC IPC1047E

    Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC

  • MitigationSIMATIC IPC647D

    Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC

  • MitigationSIMATIC IPC647D

    Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC

  • MitigationSIMATIC IPC647E

    Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC

  • MitigationSIMATIC IPC647E

    Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC

  • MitigationSIMATIC IPC847D

    Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC

  • MitigationSIMATIC IPC847D

    Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC

  • MitigationSIMATIC IPC847E

    Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC

  • MitigationSIMATIC IPC847E

    Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC

  • MitigationSiPass integrated V2.80

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSiPass integrated V2.80

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSiPass integrated V2.85

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSiPass integrated V2.85

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSimcenter 3D

    Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8601203

  • MitigationSimcenter 3D

    Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8601203

  • MitigationSimcenter Amesim

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSimcenter Amesim

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSimcenter System Architect

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSimcenter System Architect

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSimcenter System Simulation Client for Git

    Find detailed mitigation steps for both server and client installations at: https://support.sw.siemens.com/en-US/knowledge- base/PL8602538

  • MitigationSimcenter System Simulation Client for Git

    Find detailed mitigation steps for both server and client installations at: https://support.sw.siemens.com/en-US/knowledge- base/PL8602538

  • MitigationSimcenter Testlab

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSimcenter Testlab

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSimcenter Testlab Data Management

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSimcenter Testlab Data Management

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSiveillance Command

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSiveillance Command

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSiveillance Control Pro V2.1

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSiveillance Control Pro V2.1

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSiveillance Control Pro V2.2

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSiveillance Control Pro V2.2

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSiveillance Control Pro V2.3

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSiveillance Control Pro V2.3

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSiveillance Identity V1.5

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSiveillance Identity V1.5

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSiveillance Identity V1.6

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSiveillance Identity V1.6

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSiveillance Vantage

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSiveillance Vantage

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSolid Edge CAM Pro

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSolid Edge CAM Pro

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSolid Edge Wiring and Harness Design

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationSolid Edge Wiring and Harness Design

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationSpectrum Power 4

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSpectrum Power 4

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationSpectrum Power 7

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationSpectrum Power 7

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Active Workspace V4.3

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Active Workspace V4.3

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Active Workspace V5.0

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Active Workspace V5.0

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Active Workspace V5.1

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Active Workspace V5.1

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Active Workspace V5.2

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Active Workspace V5.2

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Deployment Center V4.0

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Deployment Center V4.0

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Deployment Center V4.1

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Deployment Center V4.1

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Deployment Center V4.2

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Deployment Center V4.2

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter EDA V5.1

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter EDA V5.1

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter EDA V5.2

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter EDA V5.2

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Integration Framework V13.0

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Integration Framework V13.0

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Integration Framework V13.1

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Integration Framework V13.1

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Integration Framework V13.2

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Integration Framework V13.2

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Integration Framework V3.3

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Integration Framework V3.3

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Integration Framework V4.0

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Integration Framework V4.0

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Integration for CATIA

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Integration for CATIA

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter MBSE Gateway V4.1

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter MBSE Gateway V4.1

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter MBSE Gateway V4.2

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter MBSE Gateway V4.2

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter MBSE Gateway V4.3

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter MBSE Gateway V4.3

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter MBSE Gateway V5.0

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter MBSE Gateway V5.0

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter MBSE Gateway V5.1

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter MBSE Gateway V5.1

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter MBSE Gateway V5.2

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter MBSE Gateway V5.2

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Microservices Framework V5.1

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Microservices Framework V5.1

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Microservices Framework V5.2

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Microservices Framework V5.2

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Reporting and Analytics V11

    Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8600700

  • MitigationTeamcenter Reporting and Analytics V11

    Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8600700

  • MitigationTeamcenter Reporting and Analytics V12.2

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Reporting and Analytics V12.2

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Reporting and Analytics V12.3

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Reporting and Analytics V12.3

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Reporting and Analytics V12.4

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Reporting and Analytics V12.4

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Reporting and Analytics V13

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Reporting and Analytics V13

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter Technical Publishing

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter Technical Publishing

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter V12.1

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter V12.1

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter V12.2

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter V12.2

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter V12.3

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter V12.3

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter V12.4

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter V12.4

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter V13.0

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter V13.0

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter V13.1

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter V13.1

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter V13.2

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter V13.2

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTeamcenter V13.3

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTeamcenter V13.3

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTecnomatix Intosite

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTecnomatix Intosite

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTecnomatix Plant Simulation

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTecnomatix Plant Simulation

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTecnomatix Process Designer

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTecnomatix Process Designer

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTecnomatix Process Simulate

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTecnomatix Process Simulate

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTecnomatix Process Simulate VCLite

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTecnomatix Process Simulate VCLite

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTecnomatix RobotExpert

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTecnomatix RobotExpert

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationTecnomatix eBOP Manager Server

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationTecnomatix eBOP Manager Server

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationValor Parts Library - VPL Direct

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationValor Parts Library - VPL Direct

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationValor Parts Library - VPL Server or Service

    Find detailed remediation and mitigation information at: https://support.sw.siemens.com/knowledge-base/MG618362

  • MitigationValor Parts Library - VPL Server or Service

    Find detailed remediation and mitigation information at: https://support.sw.siemens.com/knowledge-base/MG618362

  • MitigationVeSys V2019.1

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationVeSys V2019.1

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationVeSys V2020.1

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationVeSys V2020.1

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationVeSys V2021.1

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationVeSys V2021.1

    Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363

  • MitigationXpedition Enterprise (XCR) VX.2.10

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition Enterprise (XCR) VX.2.10

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition Enterprise VX.2.10

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition Enterprise VX.2.10

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition Enterprise VX.2.6

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationXpedition Enterprise VX.2.6

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationXpedition Enterprise VX.2.7

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition Enterprise VX.2.7

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition Enterprise VX.2.8

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition Enterprise VX.2.8

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition IC Packaging (XCR) VX.2.10

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition IC Packaging (XCR) VX.2.10

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition IC Packaging VX.2.10

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition IC Packaging VX.2.10

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition IC Packaging VX.2.6

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationXpedition IC Packaging VX.2.6

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationXpedition IC Packaging VX.2.7

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition IC Packaging VX.2.7

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition IC Packaging VX.2.8

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationXpedition IC Packaging VX.2.8

    Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343

  • MitigationcRSP

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationcRSP

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationcRSP Operator Client Starter

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationcRSP Operator Client Starter

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationjROS for Spectrum Power 4

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationjROS for Spectrum Power 4

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • MitigationjROS for Spectrum Power 7

    If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.

  • MitigationjROS for Spectrum Power 7

    If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.

  • Kein Fix geplantVeSys V2019.1

    Currently no fix is planned

  • Kein Fix geplantVeSys V2019.1

    Currently no fix is planned

  • BehobenAdvantage Navigator Energy & Sustainability

    Vulnerability CVE-2021-44228 fixed on central cloud service starting 2021-12-13; no user actions necessary

  • BehobenAdvantage Navigator Energy & Sustainability

    Vulnerability CVE-2021-44228 fixed on central cloud service starting 2021-12-13; no user actions necessary

  • BehobenAdvantage Navigator Software Proxy V6

    Update to V6.3 or later version

  • BehobenAdvantage Navigator Software Proxy V6

    Update to V6.3 or later version

  • BehobenBuilding Operator Discovery Distribution for the Connect X200 Gateway

    Update to V3.0.30 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109805593/
  • BehobenBuilding Operator Discovery Distribution for the Connect X200 Gateway

    Update to V3.0.30 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109805593/
  • BehobenBuilding Operator Discovery Distribution for the Connect X300 Gateway

    Update to V3.0.29 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109805593/
  • BehobenBuilding Operator Discovery Distribution for the Connect X300 Gateway

    Update to V3.0.29 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109805593/
  • BehobenBuilding Twin - 360° Viewer

    Vulnerability CVE-2021-44228 fixed on central cloud service; no user actions necessary

  • BehobenBuilding Twin - 360° Viewer

    Vulnerability CVE-2021-44228 fixed on central cloud service; no user actions necessary

  • BehobenCOMOS

    Update to V10.4.2 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109812011/
  • BehobenCOMOS

    Update to V10.4.2 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109812011/
  • BehobenCapital V2019.1

    Update to V2019.1 SP2204 or later version

    https://support.sw.siemens.com/en- US/product/861057055/downloads
  • BehobenCapital V2019.1

    Update to V2019.1 SP2204 or later version

    https://support.sw.siemens.com/en- US/product/861057055/downloads
  • BehobenCapital V2020.1

    Update to V2020.1 SP2202 or later version

    https://support.sw.siemens.com/en- US/product/861057055/downloads
  • BehobenCapital V2020.1

    Update to V2020.1 SP2202 or later version

    https://support.sw.siemens.com/en- US/product/861057055/downloads
  • BehobenCapital V2021.1

    Update to V2021.1 SP2202 or later version

    https://support.sw.siemens.com/en- US/product/861057055/downloads
  • BehobenCapital V2021.1

    Update to V2021.1 SP2202 or later version

    https://support.sw.siemens.com/en- US/product/861057055/downloads
  • BehobenCerberus DMS V5.0

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenCerberus DMS V5.0

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenCerberus DMS V5.1

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenCerberus DMS V5.1

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenDesigo CC V3.0

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenDesigo CC V3.0

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenDesigo CC V4.0

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenDesigo CC V4.0

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenDesigo CC V4.1

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenDesigo CC V4.1

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenDesigo CC V4.2

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenDesigo CC V4.2

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenDesigo CC V5.0

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenDesigo CC V5.0

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/

  • BehobenDesigo CC V5.1

    Update to V5.1 QU1 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109807893/
  • BehobenDesigo CC V5.1

    Update to V5.1 QU1 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109807893/
  • BehobenE-Car OC Cloud Application

    Vulnerability CVE-2021-44228 fixed on central cloud service starting 2021-12-13; no user actions necessary

  • BehobenE-Car OC Cloud Application

    Vulnerability CVE-2021-44228 fixed on central cloud service starting 2021-12-13; no user actions necessary

  • BehobenEnergy Engage

    Find detailed remediation and mitigation information on the EnergyIP docs portal at: https://docs.emeter.com/display/public/WELCOME/Energy IP+Security+Advisory+for+Log4Shell+Vulnerability

  • BehobenEnergy Engage

    Find detailed remediation and mitigation information on the EnergyIP docs portal at: https://docs.emeter.com/display/public/WELCOME/Energy IP+Security+Advisory+for+Log4Shell+Vulnerability

  • BehobenEnergyIP

    Find detailed remediation and mitigation information on the EnergyIP docs portal at: https://docs.emeter.com/display/public/WELCOME/Energy IP+Security+Advisory+for+Log4Shell+Vulnerability

  • BehobenEnergyIP

    Find detailed remediation and mitigation information on the EnergyIP docs portal at: https://docs.emeter.com/display/public/WELCOME/Energy IP+Security+Advisory+for+Log4Shell+Vulnerability

  • BehobenEnergyIP Prepay

    Update to V3.8.0.12 or later version

  • BehobenEnlighted Amaze

    Vulnerabilities fixed on central cloud services starting 2021-12-10; no user actions necessary

  • BehobenEnlighted Amaze

    Vulnerabilities fixed on central cloud services starting 2021-12-10; no user actions necessary

  • BehobenEnlighted Where

    Vulnerabilities fixed on central cloud services starting 2021-12-11; no user actions necessary

  • BehobenEnlighted Where

    Vulnerabilities fixed on central cloud services starting 2021-12-11; no user actions necessary

  • BehobenGMA-Manager

    Update to V8.6.2.472 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109805665/
  • BehobenGMA-Manager

    Update to V8.6.2.472 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109805665/
  • BehobenGeolus Shape Search V10

    Remove the JndiLookup class from the classpath.

  • BehobenGeolus Shape Search V10

    Remove the JndiLookup class from the classpath.

  • BehobenGeolus Shape Search V11

    Remove the JndiLookup class from the classpath.

  • BehobenGeolus Shape Search V11

    Remove the JndiLookup class from the classpath.

  • BehobenHEEDS Connect

    HEEDS Connect team will contact all impacted customers to deploy a new log4j version. This action will secure your installation against Log4Shell vulnerability. For further information see: https://support.sw.siemens.com/en-US/knowledge-base/PL8601661

  • BehobenHEEDS Connect

    HEEDS Connect team will contact all impacted customers to deploy a new log4j version. This action will secure your installation against Log4Shell vulnerability. For further information see: https://support.sw.siemens.com/en-US/knowledge-base/PL8601661

  • BehobenHES UDIS

    Specific fix versions based on V6.0.2 and V6.0.3 were released and deployed for all affected projects

  • BehobenHES UDIS

    Specific fix versions based on V6.0.2 and V6.0.3 were released and deployed for all affected projects

  • BehobenIndustrial Edge Hub

    Vulnerabilities fixed on central cloud service starting 2021-12-13; no user actions necessary

  • BehobenIndustrial Edge Hub

    Vulnerabilities fixed on central cloud service starting 2021-12-13; no user actions necessary

  • BehobenIndustrial Edge Management App (IEM-App)

    Update to V1.4.11 or later version

    https://iehub.eu1.edge.siemens.cloud/
  • BehobenIndustrial Edge Management App (IEM-App)

    Update to V1.4.11 or later version

    https://iehub.eu1.edge.siemens.cloud/
  • BehobenIndustrial Edge Management OS (IEM-OS)

    Update to V1.4.0-42 or later version

    https://iehub.eu1.edge.siemens.cloud/
  • BehobenIndustrial Edge Management OS (IEM-OS)

    Update to V1.4.0-42 or later version

    https://iehub.eu1.edge.siemens.cloud/
  • BehobenMendix Applications

    Although the Mendix runtime itself is not vulnerable to this exploit, we nevertheless recommend to upgrade log4j-core to the latest available version if log4j-core is part of your project. This advice is regardless of the JRE/JDK version the app runs on.

    https://status.mendix.com/incidents/8j5043my610c
  • BehobenMendix Applications

    Although the Mendix runtime itself is not vulnerable to this exploit, we nevertheless recommend to upgrade log4j-core to the latest available version if log4j-core is part of your project. This advice is regardless of the JRE/JDK version the app runs on.

    https://status.mendix.com/incidents/8j5043my610c
  • BehobenMindSphere App Management Cockpits (Developer& Operator)

    Vulnerabilities fixed with update on 2021-12-16; no user actions necessary

  • BehobenMindSphere App Management Cockpits (Developer& Operator)

    Vulnerabilities fixed with update on 2021-12-16; no user actions necessary

  • BehobenMindSphere Asset Manager

    Vulnerabilities fixed with update on 2021-12-16; no user actions necessary

  • BehobenMindSphere Asset Manager

    Vulnerabilities fixed with update on 2021-12-16; no user actions necessary

  • BehobenMindSphere IAM (User Management/ Settings)

    Vulnerabilities fixed with update on 2021-12-16; no user actions necessary

  • BehobenMindSphere IAM (User Management/ Settings)

    Vulnerabilities fixed with update on 2021-12-16; no user actions necessary

  • BehobenMindSphere Integrated Data Lake

    Vulnerabilities fixed with update on 2021-12-16; no user actions necessary

  • BehobenMindSphere Integrated Data Lake

    Vulnerabilities fixed with update on 2021-12-16; no user actions necessary

  • BehobenMindSphere Notification Service

    Vulnerabilities fixed with update on 2021-12-16; no user actions necessary

  • BehobenMindSphere Notification Service

    Vulnerabilities fixed with update on 2021-12-16; no user actions necessary

  • BehobenMindSphere Predictive Learning

    Vulnerabilities fixed with update on 2021-12-23; no user actions necessary

  • BehobenMindSphere Predictive Learning

    Vulnerabilities fixed with update on 2021-12-23; no user actions necessary

  • BehobenMindSphere Usage Transparency Service

    Vulnerabilities fixed with update on 2021-12-16; no user actions necessary

  • BehobenMindSphere Usage Transparency Service

    Vulnerabilities fixed with update on 2021-12-16; no user actions necessary

  • BehobenMindSphere Visual Explorer

    Vulnerabilities fixed with update on 2021-12-21; no user actions necessary

  • BehobenMindSphere Visual Explorer

    Vulnerabilities fixed with update on 2021-12-21; no user actions necessary

  • BehobenMindsphere Cloud Foundry

    Although the Cloud Foundry environment itself is not vulnerable to this exploit, we nevertheless recommend to upgrade log4j-core to the latest available version if log4j-core is part of your project. https://support.sw.siemens.com/en-US/product/268530510/knowledge- base/PL8600797

  • BehobenMindsphere Cloud Foundry

    Although the Cloud Foundry environment itself is not vulnerable to this exploit, we nevertheless recommend to upgrade log4j-core to the latest available version if log4j-core is part of your project. https://support.sw.siemens.com/en-US/product/268530510/knowledge- base/PL8600797

  • BehobenMindsphere Cloud Platform

    Vulnerabilities fixed on central cloud service starting 2021-12-11; no user actions necessary

  • BehobenMindsphere Cloud Platform

    Vulnerabilities fixed on central cloud service starting 2021-12-11; no user actions necessary

  • BehobenNX 1953 Series

    Update to V1973.4340 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600959
  • BehobenNX 1953 Series

    Update to V1973.4340 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600959
  • BehobenNX 1980 Series

    Update to V2000.3400 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600959
  • BehobenNX 1980 Series

    Update to V2000.3400 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600959
  • BehobenNX 2007 Series

    Update to V2008 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600959
  • BehobenNX 2007 Series

    Update to V2008 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600959
  • BehobenNXpower Monitor

    Vulnerabilities fixed on central cloud service starting 2021-12-19; no user actions necessary

  • BehobenNXpower Monitor

    Vulnerabilities fixed on central cloud service starting 2021-12-19; no user actions necessary

  • BehobenOpcenter EX CP Process Automation Control

    Update to V18.1 or later version to fix CVE-2021-44228

  • BehobenOpcenter EX CP Process Automation Control

    Update to V18.1 or later version to fix CVE-2021-44228

  • BehobenOpcenter Execution Core Process Automation Control

    Update to V18.1 or later version to fix CVE-2021-44228

  • BehobenOpcenter Execution Core Process Automation Control

    Update to V18.1 or later version to fix CVE-2021-44228

  • BehobenOpcenter Intelligence

    Update to V3.5 or later version

    https://support.sw.siemens.com/
  • BehobenOpcenter Intelligence

    Update to V3.5 or later version

    https://support.sw.siemens.com/
  • BehobenOperation Scheduler

    Update the UAA component to V75.8.3

    https://support.industry.siemens.com/cs/ww/en/view/109805673/
  • BehobenOperation Scheduler

    Update the UAA component to V75.8.3

    https://support.industry.siemens.com/cs/ww/en/view/109805673/
  • BehobenSENTRON powermanager V4

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805602/

  • BehobenSENTRON powermanager V4

    Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805602/

  • BehobenSIGUARD DSA

    Update to V4.4.1 or later version

  • BehobenSIGUARD DSA

    Update to V4.4.1 or later version

  • BehobenSIMATIC IPC1047

    Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/

  • BehobenSIMATIC IPC1047

    Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/

  • BehobenSIMATIC IPC1047E

    Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/

  • BehobenSIMATIC IPC1047E

    Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/

  • BehobenSIMATIC IPC647D

    Follow the remediation steps documented at https://ask.adaptec.com/app/answers/detail/a_id/17527/

  • BehobenSIMATIC IPC647D

    Follow the remediation steps documented at https://ask.adaptec.com/app/answers/detail/a_id/17527/

  • BehobenSIMATIC IPC647E

    Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/

  • BehobenSIMATIC IPC647E

    Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/

  • BehobenSIMATIC IPC847D

    Follow the remediation steps documented at https://ask.adaptec.com/app/answers/detail/a_id/17527/

  • BehobenSIMATIC IPC847D

    Follow the remediation steps documented at https://ask.adaptec.com/app/answers/detail/a_id/17527/

  • BehobenSIMATIC IPC847E

    Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/

  • BehobenSIMATIC IPC847E

    Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/

  • BehobenSiPass integrated V2.80

    Apply the patch

    https://support.industry.siemens.com/cs/ww/en/view/109805711/
  • BehobenSiPass integrated V2.80

    Apply the patch

    https://support.industry.siemens.com/cs/ww/en/view/109805711/
  • BehobenSiPass integrated V2.85

    Update to V2.85.7.5 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109801507/
  • BehobenSiPass integrated V2.85

    Update to V2.85.7.5 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109801507/
  • BehobenSimcenter 3D

    Update to 2022.1-2008 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8603477
  • BehobenSimcenter 3D

    Update to 2022.1-2008 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8603477
  • BehobenSimcenter Amesim

    Update Teamcenter to any fix version available for the different version lines of Teamcenter, see https://support.sw.siemens.com/en- US/knowledge-base/PL8600700

    https://support.sw.siemens.com/en-US/knowledge- base/PL8601572
  • BehobenSimcenter Amesim

    Update Teamcenter to any fix version available for the different version lines of Teamcenter, see https://support.sw.siemens.com/en- US/knowledge-base/PL8600700

    https://support.sw.siemens.com/en-US/knowledge- base/PL8601572
  • BehobenSimcenter System Architect

    Update Teamcenter to any fix version available for the different version lines of Teamcenter, see https://support.sw.siemens.com/en- US/knowledge-base/PL8600700

    https://support.sw.siemens.com/en-US/knowledge- base/PL8601662
  • BehobenSimcenter System Architect

    Update Teamcenter to any fix version available for the different version lines of Teamcenter, see https://support.sw.siemens.com/en- US/knowledge-base/PL8600700

    https://support.sw.siemens.com/en-US/knowledge- base/PL8601662
  • BehobenSimcenter System Simulation Client for Git

    Update to V2021.2.2 or later version

    https://support.sw.siemens.com
  • BehobenSimcenter System Simulation Client for Git

    Update to V2021.2.2 or later version

    https://support.sw.siemens.com
  • BehobenSimcenter Testlab

    Follow the remediation steps documented at: https://support.sw.siemens.com/en-US/knowledge-base/PL8602466

  • BehobenSimcenter Testlab

    Follow the remediation steps documented at: https://support.sw.siemens.com/en-US/knowledge-base/PL8602466

  • BehobenSimcenter Testlab Data Management

    Simcenter Testlab Data Management team will contact all impacted customer to deploy the mitigation measures. This action will secure your installation against Log4Shell vulnerability. For further information see: https://support.sw.siemens.com/en-US/knowledge- base/PL8601418

  • BehobenSimcenter Testlab Data Management

    Simcenter Testlab Data Management team will contact all impacted customer to deploy the mitigation measures. This action will secure your installation against Log4Shell vulnerability. For further information see: https://support.sw.siemens.com/en-US/knowledge- base/PL8601418

  • BehobenSiveillance Command

    Vulnerabilities fixed for Command installations on a project basis; no user actions necessary

  • BehobenSiveillance Command

    Vulnerabilities fixed for Command installations on a project basis; no user actions necessary

  • BehobenSiveillance Control Pro V2.1

    A hotfix is available; please contact customer support to receive the hotfix

  • BehobenSiveillance Control Pro V2.1

    A hotfix is available; please contact customer support to receive the hotfix

  • BehobenSiveillance Control Pro V2.2

    Update to V2.2.7 or later version; please contact customer support to receive the latest version

  • BehobenSiveillance Control Pro V2.2

    Update to V2.2.7 or later version; please contact customer support to receive the latest version

  • BehobenSiveillance Control Pro V2.3

    Update to V2.3.2 or later version; please contact customer support to receive the latest version

  • BehobenSiveillance Control Pro V2.3

    Update to V2.3.2 or later version; please contact customer support to receive the latest version

  • BehobenSiveillance Identity V1.5

    Update to V1.5 SP4 and apply the patch

    https://support.industry.siemens.com/cs/ww/en/view/109805657/
  • BehobenSiveillance Identity V1.5

    Update to V1.5 SP4 and apply the patch

    https://support.industry.siemens.com/cs/ww/en/view/109805657/
  • BehobenSiveillance Identity V1.6

    Update to V1.6 SP1 and apply the patch

    https://support.industry.siemens.com/cs/ww/en/view/109805657/
  • BehobenSiveillance Identity V1.6

    Update to V1.6 SP1 and apply the patch

    https://support.industry.siemens.com/cs/ww/en/view/109805657/
  • BehobenSiveillance Vantage

    Vulnerabilities fixed for Vantage installations on a project basis; no user actions necessary

  • BehobenSiveillance Vantage

    Vulnerabilities fixed for Vantage installations on a project basis; no user actions necessary

  • BehobenSolid Edge CAM Pro

    Update to V2008 or later version

    https://support.sw.siemens.com/
  • BehobenSolid Edge CAM Pro

    Update to V2008 or later version

    https://support.sw.siemens.com/
  • BehobenSolid Edge Wiring and Harness Design

    Update to V2022 SP2202 or later version

    https://support.sw.siemens.com/en- US/product/246738425/downloads
  • BehobenSolid Edge Wiring and Harness Design

    Update to V2022 SP2202 or later version

    https://support.sw.siemens.com/en- US/product/246738425/downloads
  • BehobenSpectrum Power 4

    Update to V4.70 SP9 and apply Security Patch 1. Please contact your local Siemens representative.

  • BehobenSpectrum Power 4

    Update to V4.70 SP9 and apply Security Patch 1. Please contact your local Siemens representative.

  • BehobenSpectrum Power 7

    Update to V21Q4 and apply the patch. Please contact your local Siemens representative.

  • BehobenSpectrum Power 7

    Update to V21Q4 and apply the patch. Please contact your local Siemens representative.

  • BehobenTeamcenter Active Workspace V4.3

    Update to V4.3.13 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Active Workspace V4.3

    Update to V4.3.13 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Active Workspace V5.0

    Update to V5.0.11 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Active Workspace V5.0

    Update to V5.0.11 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Active Workspace V5.1

    Update to V5.1.8 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Active Workspace V5.1

    Update to V5.1.8 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Active Workspace V5.2

    Update to V5.2.6 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Active Workspace V5.2

    Update to V5.2.6 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Deployment Center V4.0

    Update to V4.0.3 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Deployment Center V4.0

    Update to V4.0.3 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Deployment Center V4.1

    Update to V4.1.1.1 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Deployment Center V4.1

    Update to V4.1.1.1 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Deployment Center V4.2

    Update to V4.2.0.2 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Deployment Center V4.2

    Update to V4.2.0.2 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter EDA V5.1

    Update to V5.1.5 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter EDA V5.1

    Update to V5.1.5 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter EDA V5.2

    Update to V5.2.3 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter EDA V5.2

    Update to V5.2.3 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Integration Framework V13.0

    Update to V13.0.0.2 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Integration Framework V13.0

    Update to V13.0.0.2 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Integration Framework V13.1

    Update to V13.1.0.1 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Integration Framework V13.1

    Update to V13.1.0.1 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Integration Framework V13.2

    Update to V13.2.0.1 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Integration Framework V13.2

    Update to V13.2.0.1 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Integration Framework V3.3

    Update to V3.3.0.7 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Integration Framework V3.3

    Update to V3.3.0.7 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Integration Framework V4.0

    Update to V4.0.0.2 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Integration Framework V4.0

    Update to V4.0.0.2 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Integration for CATIA

    Update to V13.0.1.2 or later version

    https://support.sw.siemens.com/knowledge- base/PL8602463
  • BehobenTeamcenter Integration for CATIA

    Update to V13.0.1.2 or later version

    https://support.sw.siemens.com/knowledge- base/PL8602463
  • BehobenTeamcenter MBSE Gateway V4.1

    Update to V4.1.2 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter MBSE Gateway V4.1

    Update to V4.1.2 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter MBSE Gateway V4.2

    Update to V4.2.3 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter MBSE Gateway V4.2

    Update to V4.2.3 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter MBSE Gateway V4.3

    Update to V4.3.3 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter MBSE Gateway V4.3

    Update to V4.3.3 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter MBSE Gateway V5.0

    Update to V5.0.6 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter MBSE Gateway V5.0

    Update to V5.0.6 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter MBSE Gateway V5.1

    Update to V5.1.5 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter MBSE Gateway V5.1

    Update to V5.1.5 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter MBSE Gateway V5.2

    Update to V5.2.4 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter MBSE Gateway V5.2

    Update to V5.2.4 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Microservices Framework V5.1

    Update to V5.1.8 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Microservices Framework V5.1

    Update to V5.1.8 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Microservices Framework V5.2

    Update to V5.2.6 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Microservices Framework V5.2

    Update to V5.2.6 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter Reporting and Analytics V11

    Remove the JndiLookup class from the classpath.

  • BehobenTeamcenter Reporting and Analytics V11

    Remove the JndiLookup class from the classpath.

  • BehobenTeamcenter Reporting and Analytics V12.2

    Update to V12.2.8 or later version

    https://support.sw.siemens.com/enUS/knowledge- base/PL8600700
  • BehobenTeamcenter Reporting and Analytics V12.2

    Update to V12.2.8 or later version

    https://support.sw.siemens.com/enUS/knowledge- base/PL8600700
  • BehobenTeamcenter Reporting and Analytics V12.3

    Update to V12.3.11 or later version

    https://support.sw.siemens.com/enUS/knowledge- base/PL8600700
  • BehobenTeamcenter Reporting and Analytics V12.3

    Update to V12.3.11 or later version

    https://support.sw.siemens.com/enUS/knowledge- base/PL8600700
  • BehobenTeamcenter Reporting and Analytics V12.4

    Update to V12.4.1 or later version

    https://support.sw.siemens.com/enUS/knowledge- base/PL8600700
  • BehobenTeamcenter Reporting and Analytics V12.4

    Update to V12.4.1 or later version

    https://support.sw.siemens.com/enUS/knowledge- base/PL8600700
  • BehobenTeamcenter Reporting and Analytics V13

    Update to V13.2.1.1 or V13.3.0.0 or later version

    https://support.sw.siemens.com/enUS/knowledge- base/PL8600700
  • BehobenTeamcenter Reporting and Analytics V13

    Update to V13.2.1.1 or V13.3.0.0 or later version

    https://support.sw.siemens.com/enUS/knowledge- base/PL8600700
  • BehobenTeamcenter Technical Publishing

    Update to V13.0.1 or later version

    https://support.sw.siemens.com/knowledge- base/PL8612040
  • BehobenTeamcenter Technical Publishing

    Update to V13.0.1 or later version

    https://support.sw.siemens.com/knowledge- base/PL8612040
  • BehobenTeamcenter V12.1

    Update to V12.1.0.14 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V12.1

    Update to V12.1.0.14 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V12.2

    Update to V12.2.0.18 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V12.2

    Update to V12.2.0.18 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V12.3

    Update to V12.3.0.15 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V12.3

    Update to V12.3.0.15 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V12.4

    Update to V12.4.0.12 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V12.4

    Update to V12.4.0.12 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V13.0

    Update to V13.0.0.9 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V13.0

    Update to V13.0.0.9 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V13.1

    Update to V13.1.0.8 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V13.1

    Update to V13.1.0.8 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V13.2

    Update to V13.2.0.6 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V13.2

    Update to V13.2.0.6 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V13.3

    Update to V13.3.0.1 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTeamcenter V13.3

    Update to V13.3.0.1 or later version

    https://support.sw.siemens.com/en-US/knowledge- base/PL8600700
  • BehobenTecnomatix Intosite

    Vulnerabilities fixed on central cloud service; no user actions necessary

  • BehobenTecnomatix Intosite

    Vulnerabilities fixed on central cloud service; no user actions necessary

  • BehobenTecnomatix Plant Simulation

    Download and install the updated TCCS setup from the Siemens Support Center; for details see https://support.sw.siemens.com/knowledge- base/PL8615527

  • BehobenTecnomatix Plant Simulation

    Download and install the updated TCCS setup from the Siemens Support Center; for details see https://support.sw.siemens.com/knowledge- base/PL8615527

  • BehobenTecnomatix Process Designer

    Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2

    https://support.sw.siemens.com/en-US/knowledge- base/PL8602057
  • BehobenTecnomatix Process Designer

    Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2

    https://support.sw.siemens.com/en-US/knowledge- base/PL8602057
  • BehobenTecnomatix Process Simulate

    Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2

    https://support.sw.siemens.com/en-US/knowledge- base/PL8602057
  • BehobenTecnomatix Process Simulate

    Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2

    https://support.sw.siemens.com/en-US/knowledge- base/PL8602057
  • BehobenTecnomatix Process Simulate VCLite

    Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2

    https://support.sw.siemens.com/en-US/knowledge- base/PL8602057
  • BehobenTecnomatix Process Simulate VCLite

    Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2

    https://support.sw.siemens.com/en-US/knowledge- base/PL8602057
  • BehobenTecnomatix RobotExpert

    Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2

    https://support.sw.siemens.com/en-US/knowledge- base/PL8602057
  • BehobenTecnomatix RobotExpert

    Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2

    https://support.sw.siemens.com/en-US/knowledge- base/PL8602057
  • BehobenTecnomatix eBOP Manager Server

    Apply the hotfix

    https://support.sw.siemens.com/en-US/knowledge- base/PL8602057
  • BehobenTecnomatix eBOP Manager Server

    Apply the hotfix

    https://support.sw.siemens.com/en-US/knowledge- base/PL8602057
  • BehobenValor Parts Library - VPL Direct

    Vulnerabilities fixed on remote VPL server; no user actions necessary

  • BehobenValor Parts Library - VPL Direct

    Vulnerabilities fixed on remote VPL server; no user actions necessary

  • BehobenValor Parts Library - VPL Server or Service

    Remove the JndiLookup class from the classpath.

  • BehobenValor Parts Library - VPL Server or Service

    Remove the JndiLookup class from the classpath.

  • BehobenVeSys V2020.1

    Update to V2020.1 SP2202 or later version

    https://support.sw.siemens.com/en- US/product/852852123/downloads
  • BehobenVeSys V2020.1

    Update to V2020.1 SP2202 or later version

    https://support.sw.siemens.com/en- US/product/852852123/downloads
  • BehobenVeSys V2021.1

    Update to V2021.1 SP2202 or later version

    https://support.sw.siemens.com/en- US/product/852852123/downloads
  • BehobenVeSys V2021.1

    Update to V2021.1 SP2202 or later version

    https://support.sw.siemens.com/en- US/product/852852123/downloads
  • BehobenXpedition Enterprise (XCR) VX.2.10

    Update to VX.2.10 Update 4 or later version

    https://support.sw.siemens.com/en-US/product/1644094854/download/2022 01034
  • BehobenXpedition Enterprise (XCR) VX.2.10

    Update to VX.2.10 Update 4 or later version

    https://support.sw.siemens.com/en-US/product/1644094854/download/2022 01034
  • BehobenXpedition Enterprise VX.2.10

    Update to VX.2.10 Update 4 or later version

    https://support.sw.siemens.com/en-US/product/852852130/download/20220 1033
  • BehobenXpedition Enterprise VX.2.10

    Update to VX.2.10 Update 4 or later version

    https://support.sw.siemens.com/en-US/product/852852130/download/20220 1033
  • BehobenXpedition Enterprise VX.2.6

    Apply the hotfix

    https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
  • BehobenXpedition Enterprise VX.2.6

    Apply the hotfix

    https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
  • BehobenXpedition Enterprise VX.2.7

    Update to VX.2.7 Update 19 or later version

    https://support.sw.siemens.com/en-US/product/852852130/download/20220 1039
  • BehobenXpedition Enterprise VX.2.7

    Update to VX.2.7 Update 19 or later version

    https://support.sw.siemens.com/en-US/product/852852130/download/20220 1039
  • BehobenXpedition Enterprise VX.2.8

    Update to VX.2.8 Update 13 or later version

    https://support.sw.siemens.com/en-US/product/852852130/download/20220 1037
  • BehobenXpedition Enterprise VX.2.8

    Update to VX.2.8 Update 13 or later version

    https://support.sw.siemens.com/en-US/product/852852130/download/20220 1037
  • BehobenXpedition IC Packaging (XCR) VX.2.10

    Update to VX.2.10 Update 4 or later version

    https://support.sw.siemens.com/en-US/product/1644094857/download/2022 01036
  • BehobenXpedition IC Packaging (XCR) VX.2.10

    Update to VX.2.10 Update 4 or later version

    https://support.sw.siemens.com/en-US/product/1644094857/download/2022 01036
  • BehobenXpedition IC Packaging VX.2.10

    Update to VX.2.10 Update 4 or later version

    https://support.sw.siemens.com/en-US/product/1091814625/download/2022 01035
  • BehobenXpedition IC Packaging VX.2.10

    Update to VX.2.10 Update 4 or later version

    https://support.sw.siemens.com/en-US/product/1091814625/download/2022 01035
  • BehobenXpedition IC Packaging VX.2.6

    Apply the hotfix

    https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
  • BehobenXpedition IC Packaging VX.2.6

    Apply the hotfix

    https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
  • BehobenXpedition IC Packaging VX.2.7

    Update to VX.2.7 Update 19 or later version

    https://support.sw.siemens.com/en-US/product/1091814625/download/2022 01040
  • BehobenXpedition IC Packaging VX.2.7

    Update to VX.2.7 Update 19 or later version

    https://support.sw.siemens.com/en-US/product/1091814625/download/2022 01040
  • BehobenXpedition IC Packaging VX.2.8

    Update to VX.2.8 Update 13 or later version

    https://support.sw.siemens.com/en-US/product/1091814625/download/2022 01038
  • BehobenXpedition IC Packaging VX.2.8

    Update to VX.2.8 Update 13 or later version

    https://support.sw.siemens.com/en-US/product/1091814625/download/2022 01038
  • BehobencRSP

    Update to V13.17.2 was deployed on all cRSP services on 2021-12-21; no user actions necessary

  • BehobencRSP

    Update to V13.17.2 was deployed on all cRSP services on 2021-12-21; no user actions necessary

  • BehobencRSP Operator Client Starter

    Update to V1.7.18 or later version, as provided via cRSP V13.17.2 or later version

  • BehobencRSP Operator Client Starter

    Update to V1.7.18 or later version, as provided via cRSP V13.17.2 or later version

  • BehobenjROS for Spectrum Power 4

    Update to V4.70 SP9 Security Patch 1 or later version. Please contact your local Siemens representative.

  • BehobenjROS for Spectrum Power 4

    Update to V4.70 SP9 Security Patch 1 or later version. Please contact your local Siemens representative.

  • BehobenjROS for Spectrum Power 7

    Apply the patch. Please contact your local Siemens representative.

  • BehobenjROS for Spectrum Power 7

    Apply the patch. Please contact your local Siemens representative.

scry

Advisories wie diese benennen die exponierten Produkte, die Angreifer auf Ihrer Angriffsfläche ins Visier nehmen. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.

Kostenloser Scan