ICSA-16-308-01

icsaUScisa_csaf_ot

Moxa OnCell Security Vulnerabilities

Advisory ansehen veröffentlicht 2016-08-07

This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov

01

beschreibt (2)

Zugehörige CVEs.

IDSchweregrad ausnutzbar
CVE-2016-8363UScritical10.0—
An issue was discovered in Moxa OnCell OnCellG3470A-LTE, AWK-1131A/3131A/4131A Series, AWK-3191 Series, AWK-5232/6232 Series, AWK-1121/1127 Series, WAC-1001 V2 Series, WAC-2004 Ser…
CVE-2016-8362USmedium6.5—
An issue was discovered in Moxa OnCell OnCellG3470A-LTE, AWK-1131A/3131A/4131A Series, AWK-3191 Series, AWK-5232/6232 Series, AWK-1121/1127 Series, WAC-1001 V2 Series, WAC-2004 Ser…
02

Referenzen

Externe Belege — Patches, Meldungen, Analysen.

03

Behebungen (28)

  • MitigationOnCell AWK-1121/1127 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-1121/1127 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-1131A/3131A/4131A Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-1131A/3131A/4131A Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-3121-M12-RTG Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-3121-M12-RTG Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-3121/4121 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-3121/4121 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-3131-M12-RCC Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-3131-M12-RCC Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-3131/4131 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-3131/4131 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-3191 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-3191 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-5222/6222 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-5222/6222 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-5232-M12-RCC Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-5232-M12-RCC Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-5232/6232 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell AWK-5232/6232 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell G3470A-LTE

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell G3470A-LTE

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell TAP-6226 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell TAP-6226 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell WAC-1001 V2 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationOnCell WAC-1001 V2 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationWAC-2004 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

  • MitigationWAC-2004 Series

    Moxa recommends that users disable HTTP/HTTPS after completing required configuration through web browser interface. Users can access via SNMP to enable HTTP/HTTPS if needed. If remote control or monitoring is required, users should enable “IP Protocol Filter” feature of OnCell/AWK products to prevent any unauthorized access to the administrative web management interface.

scry

Advisories wie diese benennen die exponierten Produkte, die Angreifer auf Ihrer Angriffsfläche ins Visier nehmen. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.

Kostenloser Scan