ICSA-19-253-03_Siemens Industrial Products (Update P)
Successful exploitation of these vulnerabilities could cause denial-of-service condition.
beschreibt (4)
Zugehörige CVEs.
| ID | Schweregrad | ausnutzbar | ||
|---|---|---|---|---|
| CVE-2019-8460US | high7.5 | — | ||
OpenBSD kernel version <= 6.5 can be forced to create long chains of TCP SACK holes that causes very expensive calls to tcp_sack_option() for every incoming SACK packet which can l… | ||||
| CVE-2019-11479US | high7.5 | — | ||
Jonathan Looney discovered that the Linux kernel default MSS is hard-coded to 48 bytes. This allows a remote peer to fragment TCP resend queues significantly more than if a larger… | ||||
| CVE-2019-11478US | high7.5 | — | ||
Jonathan Looney discovered that the TCP retransmission queue implementation in tcp_fragment in the Linux kernel could be fragmented when handling certain TCP Selective Acknowledgme… | ||||
| CVE-2019-11477US | high7.5 | Exploit | ||
Jonathan Looney discovered that the TCP_SKB_CB(skb)->tcp_gso_segs value was subject to an integer overflow in the Linux kernel when handling TCP Selective Acknowledgments (SACKs).… | ||||
Referenzen
Externe Belege — Patches, Meldungen, Analysen.
Behebungen (428)
- MitigationCloudConnect 712
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationCloudConnect 712
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationCloudConnect 712
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationCloudConnect 712
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationROX II
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationROX II
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationROX II
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationROX II
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM APE 1404 Linux
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM APE 1404 Linux
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM APE 1404 Linux
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM APE 1404 Linux
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM RM1224 (6GK6108-4AM00)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM RM1224 (6GK6108-4AM00)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM RM1224 (6GK6108-4AM00)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM RM1224 (6GK6108-4AM00)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM RX 1400 VPE Debian Linux
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM RX 1400 VPE Debian Linux
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM RX 1400 VPE Debian Linux
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM RX 1400 VPE Debian Linux
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM RX 1400 VPE Linux CloudConnect
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM RX 1400 VPE Linux CloudConnect
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM RX 1400 VPE Linux CloudConnect
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationRUGGEDCOM RX 1400 VPE Linux CloudConnect
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M804PB (6GK5804-0AP00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M804PB (6GK5804-0AP00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M804PB (6GK5804-0AP00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M804PB (6GK5804-0AP00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M812-1 ADSL-Router (Annex A) (6GK5812-1AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M812-1 ADSL-Router (Annex A) (6GK5812-1AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M812-1 ADSL-Router (Annex A) (6GK5812-1AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M812-1 ADSL-Router (Annex A) (6GK5812-1AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M812-1 ADSL-Router (Annex B) (6GK5812-1BA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M812-1 ADSL-Router (Annex B) (6GK5812-1BA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M812-1 ADSL-Router (Annex B) (6GK5812-1BA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M812-1 ADSL-Router (Annex B) (6GK5812-1BA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M816-1 ADSL-Router (Annex A) (6GK5816-1AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M816-1 ADSL-Router (Annex A) (6GK5816-1AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M816-1 ADSL-Router (Annex A) (6GK5816-1AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M816-1 ADSL-Router (Annex A) (6GK5816-1AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M816-1 ADSL-Router (Annex B) (6GK5816-1BA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M816-1 ADSL-Router (Annex B) (6GK5816-1BA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M816-1 ADSL-Router (Annex B) (6GK5816-1BA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M816-1 ADSL-Router (Annex B) (6GK5816-1BA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M874-2 (6GK5874-2AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M874-2 (6GK5874-2AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M874-2 (6GK5874-2AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M874-2 (6GK5874-2AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M874-3 (6GK5874-3AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M874-3 (6GK5874-3AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M874-3 (6GK5874-3AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M874-3 (6GK5874-3AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M875
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M875
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M875
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M875
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-3 (6GK5876-3AA02-2BA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-3 (6GK5876-3AA02-2BA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-3 (6GK5876-3AA02-2BA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-3 (6GK5876-3AA02-2BA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S602
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S602
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S602
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S602
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S612
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S612
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S612
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S612
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S615 (6GK5615-0AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S615 (6GK5615-0AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S615 (6GK5615-0AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S615 (6GK5615-0AA00-2AA2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S623
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S623
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S623
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S623
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S627-2M
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S627-2M
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S627-2M
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE S627-2M
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC622-2C (6GK5622-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC622-2C (6GK5622-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC622-2C (6GK5622-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC622-2C (6GK5622-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC632-2C (6GK5632-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC632-2C (6GK5632-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC632-2C (6GK5632-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC632-2C (6GK5632-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC636-2C (6GK5636-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC636-2C (6GK5636-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC636-2C (6GK5636-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC636-2C (6GK5636-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC642-2C (6GK5642-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC642-2C (6GK5642-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC642-2C (6GK5642-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC642-2C (6GK5642-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC646-2C (6GK5646-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC646-2C (6GK5646-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC646-2C (6GK5646-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE SC646-2C (6GK5646-2GS00-2AC2)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE W-1700 IEEE 802.11ac family
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE W-1700 IEEE 802.11ac family
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE W-1700 IEEE 802.11ac family
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE W-1700 IEEE 802.11ac family
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE W-700 IEEE 802.11n family
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE W-700 IEEE 802.11n family
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE W-700 IEEE 802.11n family
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE W-700 IEEE 802.11n family
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE W1750D
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE W1750D
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE W1750D
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE W1750D
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE WLC711
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE WLC711
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE WLC711
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE WLC711
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE WLC712
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE WLC712
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE WLC712
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSCALANCE WLC712
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CM 1542-1
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CM 1542-1
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CM 1542-1
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CM 1542-1
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1242-7C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1242-7C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1242-7C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1242-7C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-1 (6GK7243-1BX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-1 (6GK7243-1BX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-1 (6GK7243-1BX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-1 (6GK7243-1BX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-7 LTE EU (6GK7243-7KX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-7 LTE EU (6GK7243-7KX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-7 LTE EU (6GK7243-7KX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-7 LTE EU (6GK7243-7KX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-7 LTE US (6GK7243-7SX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-7 LTE US (6GK7243-7SX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-7 LTE US (6GK7243-7SX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-7 LTE US (6GK7243-7SX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-8 IRC (6GK7243-8RX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-8 IRC (6GK7243-8RX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-8 IRC (6GK7243-8RX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1243-8 IRC (6GK7243-8RX30-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1542SP-1 IRC (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1542SP-1 IRC (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1542SP-1 IRC (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1542SP-1 IRC (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1543-1 (6GK7543-1AX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1543-1 (6GK7543-1AX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1543-1 (6GK7543-1AX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1543-1 (6GK7543-1AX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1623 (6GK1162-3AA00)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1623 (6GK1162-3AA00)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1623 (6GK1162-3AA00)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1623 (6GK1162-3AA00)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1628 (6GK1162-8AA00)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1628 (6GK1162-8AA00)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1628 (6GK1162-8AA00)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 1628 (6GK1162-8AA00)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 343-1 Advanced (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 343-1 Advanced (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 343-1 Advanced (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 343-1 Advanced (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 442-1 RNA (6GK7442-1RX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 442-1 RNA (6GK7442-1RX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 442-1 RNA (6GK7442-1RX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 442-1 RNA (6GK7442-1RX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 Advanced (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 Advanced (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 Advanced (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 Advanced (incl. SIPLUS variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 OPC UA (6GK7443-1UX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 OPC UA (6GK7443-1UX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 OPC UA (6GK7443-1UX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 OPC UA (6GK7443-1UX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 RNA (6GK7443-1RX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 RNA (6GK7443-1RX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 RNA (6GK7443-1RX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC CP 443-1 RNA (6GK7443-1RX00-0XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1500
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1500
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1500
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1500
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1500 PRO
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1500 PRO
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1500 PRO
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1500 PRO
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1900
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1900
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1900
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1900
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1900 PRO
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1900 PRO
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1900 PRO
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC1900 PRO
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC2200
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC2200
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC2200
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC2200
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC2200 PRO
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC2200 PRO
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC2200 PRO
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC ITC2200 PRO
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV540 H (6GF3540-0GE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV540 H (6GF3540-0GE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV540 H (6GF3540-0GE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV540 H (6GF3540-0GE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV540 S (6GF3540-0CD10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV540 S (6GF3540-0CD10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV540 S (6GF3540-0CD10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV540 S (6GF3540-0CD10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV550 H (6GF3550-0GE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV550 H (6GF3550-0GE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV550 H (6GF3550-0GE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV550 H (6GF3550-0GE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV550 S (6GF3550-0CD10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV550 S (6GF3550-0CD10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV550 S (6GF3550-0CD10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV550 S (6GF3550-0CD10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV560 U (6GF3560-0LE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV560 U (6GF3560-0LE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV560 U (6GF3560-0LE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV560 U (6GF3560-0LE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV560 X (6GF3560-0HE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV560 X (6GF3560-0HE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV560 X (6GF3560-0HE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC MV560 X (6GF3560-0HE10)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF185C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF185C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF185C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF185C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF186C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF186C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF186C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF186C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF186CI
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF186CI
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF186CI
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF186CI
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF188C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF188C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF188C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF188C
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF188CI
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF188CI
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF188CI
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC RF188CI
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF610R CMIIT (6GT2811-6BC10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF610R CMIIT (6GT2811-6BC10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF610R CMIIT (6GT2811-6BC10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF610R CMIIT (6GT2811-6BC10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF610R ETSI (6GT2811-6BC10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF610R ETSI (6GT2811-6BC10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF610R ETSI (6GT2811-6BC10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF610R ETSI (6GT2811-6BC10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF610R FCC (6GT2811-6BC10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF610R FCC (6GT2811-6BC10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF610R FCC (6GT2811-6BC10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF610R FCC (6GT2811-6BC10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF615R CMIIT (6GT2811-6CC10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF615R CMIIT (6GT2811-6CC10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF615R CMIIT (6GT2811-6CC10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF615R CMIIT (6GT2811-6CC10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF615R ETSI (6GT2811-6CC10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF615R ETSI (6GT2811-6CC10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF615R ETSI (6GT2811-6CC10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF615R ETSI (6GT2811-6CC10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF615R FCC (6GT2811-6CC10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF615R FCC (6GT2811-6CC10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF615R FCC (6GT2811-6CC10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF615R FCC (6GT2811-6CC10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R ARIB (6GT2811-6AB20-4AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R ARIB (6GT2811-6AB20-4AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R ARIB (6GT2811-6AB20-4AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R ARIB (6GT2811-6AB20-4AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R CMIIT (6GT2811-6AB20-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R CMIIT (6GT2811-6AB20-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R CMIIT (6GT2811-6AB20-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R CMIIT (6GT2811-6AB20-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R ETSI (6GT2811-6AB20-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R ETSI (6GT2811-6AB20-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R ETSI (6GT2811-6AB20-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R ETSI (6GT2811-6AB20-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R FCC (6GT2811-6AB20-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R FCC (6GT2811-6AB20-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R FCC (6GT2811-6AB20-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF650R FCC (6GT2811-6AB20-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R ARIB (6GT2811-6AA10-4AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R ARIB (6GT2811-6AA10-4AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R ARIB (6GT2811-6AA10-4AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R ARIB (6GT2811-6AA10-4AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R CMIIT (6GT2811-6AA10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R CMIIT (6GT2811-6AA10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R CMIIT (6GT2811-6AA10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R CMIIT (6GT2811-6AA10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R ETSI (6GT2811-6AA10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R ETSI (6GT2811-6AA10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R ETSI (6GT2811-6AA10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R ETSI (6GT2811-6AA10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R FCC (6GT2811-6AA10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R FCC (6GT2811-6AA10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R FCC (6GT2811-6AA10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF680R FCC (6GT2811-6AA10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R ARIB (6GT2811-6CA10-4AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R ARIB (6GT2811-6CA10-4AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R ARIB (6GT2811-6CA10-4AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R ARIB (6GT2811-6CA10-4AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R CMIIT (6GT2811-6CA10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R CMIIT (6GT2811-6CA10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R CMIIT (6GT2811-6CA10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R CMIIT (6GT2811-6CA10-2AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R ETSI (6GT2811-6CA10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R ETSI (6GT2811-6CA10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R ETSI (6GT2811-6CA10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R ETSI (6GT2811-6CA10-0AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R FCC (6GT2811-6CA10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R FCC (6GT2811-6CA10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R FCC (6GT2811-6CA10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Reader RF685R FCC (6GT2811-6CA10-1AA0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (MLFB- 6ES7518-4AX00-1AC0 6AG1518-4AX00-4AC0 incl. SIPLUS variant)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (MLFB- 6ES7518-4AX00-1AC0 6AG1518-4AX00-4AC0 incl. SIPLUS variant)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (MLFB- 6ES7518-4AX00-1AC0 6AG1518-4AX00-4AC0 incl. SIPLUS variant)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (MLFB- 6ES7518-4AX00-1AC0 6AG1518-4AX00-4AC0 incl. SIPLUS variant)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Teleservice Adapter IE Advanced
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Teleservice Adapter IE Advanced
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Teleservice Adapter IE Advanced
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Teleservice Adapter IE Advanced
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Teleservice Adapter IE Basic
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Teleservice Adapter IE Basic
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Teleservice Adapter IE Basic
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIMATIC Teleservice Adapter IE Basic
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINEMA Remote Connect Server
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINEMA Remote Connect Server
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINEMA Remote Connect Server
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINEMA Remote Connect Server
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINUMERIK 808D
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINUMERIK 808D
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINUMERIK 808D
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINUMERIK 808D
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINUMERIK 828D
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINUMERIK 828D
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINUMERIK 828D
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINUMERIK 828D
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINUMERIK 840D sl
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINUMERIK 840D sl
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINUMERIK 840D sl
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSINUMERIK 840D sl
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS NET CP 1543-1 (6AG1543-1AX00-2XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS NET CP 1543-1 (6AG1543-1AX00-2XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS NET CP 1543-1 (6AG1543-1AX00-2XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS NET CP 1543-1 (6AG1543-1AX00-2XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS S7-1200 CP 1243-1 (6AG1243-1BX30-2AX0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS S7-1200 CP 1243-1 (6AG1243-1BX30-2AX0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS S7-1200 CP 1243-1 (6AG1243-1BX30-2AX0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS S7-1200 CP 1243-1 (6AG1243-1BX30-2AX0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS S7-1200 CP 1243-1 RAIL (6AG2243-1BX30-1XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS S7-1200 CP 1243-1 RAIL (6AG2243-1BX30-1XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS S7-1200 CP 1243-1 RAIL (6AG2243-1BX30-1XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS S7-1200 CP 1243-1 RAIL (6AG2243-1BX30-1XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationSIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 1531 IRC (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 1531 IRC (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 1531 IRC (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 1531 IRC (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 3V-IE (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 3V-IE (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 3V-IE (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 3V-IE (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 3V-IE Advanced (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 3V-IE Advanced (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 3V-IE Advanced (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 3V-IE Advanced (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 3V-IE DNP3 (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 3V-IE DNP3 (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 3V-IE DNP3 (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 3V-IE DNP3 (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 4R-IE (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 4R-IE (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 4R-IE (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 4R-IE (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 4R-IE DNP3 (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 4R-IE DNP3 (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 4R-IE DNP3 (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957 - MitigationTIM 4R-IE DNP3 (incl. SIPLUS NET variants)
The following products are discontinued as of October 1, 2019. Siemens recommends upgrading hardware to successor products from the SCALANCE SC-600 family and applying patches when available, or following the manual mitigations addressed below.SCALANCE S602: Update to v4.1 (Update is only available via Siemens Support contact)
https://support.industry.siemens.com/cs/document/109756957
Advisories wie diese benennen die exponierten Produkte, die Angreifer auf Ihrer Angriffsfläche ins Visier nehmen. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.
Kostenloser Scan