Red Hat Security Advisory: samba security update
An update for samba is now available for Red Hat Enterprise Linux 8.2 Extended Update Support. Red Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.
describes (2)
Related CVEs.
| ID | severity | exploitable | ||
|---|---|---|---|---|
| CVE-2020-25717US | high8.1 | — | ||
A flaw was found in the way Samba maps domain users to local users. An authenticated attacker could use this flaw to cause possible privilege escalation. | ||||
| CVE-2016-2124US | medium5.9 | — | ||
A flaw was found in the way samba implemented SMB1 authentication. An attacker could use this flaw to retrieve the plaintext password sent over the wire even if Kerberos authentica… | ||||
references
External citations — patches, advisories, analysis.
remediations (1148)
- Fixedctdb-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedctdb-tests-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-devel-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-devel-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-devel-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-devel-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-devel-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-devel-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-devel-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-devel-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-devel-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibsmbclient-devel-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-devel-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-devel-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-devel-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-devel-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-devel-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-devel-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-devel-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-devel-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-devel-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedlibwbclient-devel-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-test-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-test-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-test-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-test-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-test-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-test-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-test-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedpython3-samba-test-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-0:4.11.2-18.el8_2.src as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-0:4.11.2-18.el8_2.src as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-0:4.11.2-18.el8_2.noarch as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-0:4.11.2-18.el8_2.noarch as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-debugsource-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-pidl-0:4.11.2-18.el8_2.noarch as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-pidl-0:4.11.2-18.el8_2.noarch as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-vfs-glusterfs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-vfs-glusterfs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-vfs-glusterfs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-vfs-glusterfs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Fixedsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the smb service will be restarted automatically.
https://access.redhat.com/errata/RHSA-2022:0074 - Workaroundctdb-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundctdb-tests-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-devel-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-devel-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-devel-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-devel-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-devel-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-devel-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-devel-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-devel-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibsmbclient-devel-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibsmbclient-devel-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-devel-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-devel-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-devel-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-devel-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-devel-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-devel-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-devel-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-devel-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundlibwbclient-devel-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundlibwbclient-devel-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-test-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-test-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-test-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-test-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-test-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-test-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundpython3-samba-test-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundpython3-samba-test-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-0:4.11.2-18.el8_2.src as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-0:4.11.2-18.el8_2.src as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-client-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-0:4.11.2-18.el8_2.noarch as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-0:4.11.2-18.el8_2.noarch as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-common-tools-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-debugsource-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-krb5-printing-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-pidl-0:4.11.2-18.el8_2.noarch as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-pidl-0:4.11.2-18.el8_2.noarch as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-test-libs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-vfs-glusterfs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-vfs-glusterfs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-vfs-glusterfs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-vfs-glusterfs-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-clients-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-krb5-locator-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.aarch64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.i686 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.ppc64le as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.s390x as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat CodeReady Linux Builder EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
- Workaroundsamba-winbind-modules-debuginfo-0:4.11.2-18.el8_2.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS (v. 8.2)
Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
Advisories like this name the exposed products attackers go after on your perimeter. See what is exposed on your perimeter with a free passive scan.
Free scan