Red Hat Security Advisory: kernel security update
Updated kernel packages that fix two security issues are now available for Red Hat Enterprise Linux 6.4 Extended Update Support. The Red Hat Security Response Team has rated this update as having Important security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section.
describes (2)
Related CVEs.
| ID | severity | exploitable | ||
|---|---|---|---|---|
| CVE-2014-4943US | medium6.9 | Exploit | ||
The PPPoL2TP feature in net/l2tp/l2tp_ppp.c in the Linux kernel through 3.15.6 allows local users to gain privileges by leveraging data-structure differences between an l2tp socket… | ||||
| CVE-2014-4699US | medium6.9 | Exploit | ||
The Linux kernel before 3.15.4 on Intel processors does not properly restrict use of a non-canonical value for the saved RIP address in the case of a system call that does not use… | ||||
references
External citations — patches, advisories, analysis.
remediations (294)
- Fixedkernel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-bootwrapper-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-bootwrapper-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-devel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-devel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-devel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-devel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debug-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-i686-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-i686-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-i686-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-i686-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-ppc64-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-ppc64-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-ppc64-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-ppc64-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-s390x-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-s390x-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-s390x-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-s390x-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-devel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-devel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-devel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-devel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-doc-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-doc-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-doc-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-doc-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-firmware-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-firmware-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-firmware-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-firmware-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-headers-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-headers-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-headers-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-headers-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-headers-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-headers-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-headers-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-headers-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-headers-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-headers-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-kdump-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-kdump-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-kdump-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-kdump-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-kdump-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-kdump-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-kdump-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedkernel-kdump-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Fixedpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
Before applying this update, make sure all previously released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/articles/11258 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2014:0925 - Workaroundkernel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-0:2.6.32-358.46.2.el6.src as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-bootwrapper-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-devel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-devel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debug-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-common-i686-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-common-i686-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-common-ppc64-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-common-ppc64-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-common-s390x-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-common-s390x-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-devel-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-devel-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-devel-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-doc-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-doc-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-firmware-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-firmware-0:2.6.32-358.46.2.el6.noarch as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-headers-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-headers-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-headers-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-headers-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-headers-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-kdump-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-kdump-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-kdump-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundkernel-kdump-devel-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundperf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.i686 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.s390x as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Compute Node Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
- Workaroundpython-perf-debuginfo-0:2.6.32-358.46.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional EUS (v. 6.4)
For Red Hat Enterprise Linux 6 do -- ]# echo "install pppol2tp /bin/true" > /etc/modprobe.d/pppol2tp.conf For Red Hat Enterprise Linux 7 do -- ]# echo "install l2tp_ppp /bin/true" > /etc/modprobe.d/l2t_pppp.conf Or, alternatively, when pppol2tp/l2tp_ppp module can't be blacklisted and needs to be loaded, you can use the following systemtap script -- 1) On the host, save the following in a file with the ".stp" extension -- probe module("*l2tp*").function("pppol2tp_*etsockopt").call { $level = 273; } 2) Install the "systemtap" package and any required dependencies. Refer to the "2. Using SystemTap" chapter in the Red Hat Enterprise Linux 6 "SystemTap Beginners Guide" document, available from docs.redhat.com, for information on installing the required -debuginfo packages. 3) Run the "stap -g [filename-from-step-1].stp" command as root. If the host is rebooted, the changes will be lost and the script must be run again. Alternatively, build the systemtap script on a development system with "stap -g -p 4 [filename-from-step-1].stp", distribute the resulting kernel module to all affected systems, and run "staprun -L <module>" on those. When using this approach only systemtap-runtime package is required on the affected systems. Please notice that the kernel version must be the same across all systems.
Advisories like this name the exposed products attackers go after on your perimeter. See what is exposed on your perimeter with a free passive scan.
Free scan