RHSA-2024:3392

csafUSredhat_csaf

Red Hat Security Advisory: pcp security update

view advisory published 2024-05-28

An update for pcp is now available for Red Hat Enterprise Linux 8.2 Advanced Update Support. Red Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.

01

describes (1)

Related CVEs.

IDseverity exploitable
CVE-2024-3019US——
A flaw was found in PCP. The default pmproxy configuration exposes the Redis server backend to the local network, allowing remote command execution with the privileges of the Redis…
02

references

External citations — patches, advisories, analysis.

03

remediations (358)

  • Fixedpcp-0:5.0.2-8.el8_2.src as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-conf-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-debugsource-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-debugsource-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-devel-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-devel-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-devel-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-devel-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-doc-0:5.0.2-8.el8_2.noarch as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-export-pcp2elasticsearch-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-export-pcp2graphite-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-export-pcp2influxdb-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-export-pcp2json-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-export-pcp2spark-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-export-pcp2xml-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-export-pcp2zabbix-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-export-zabbix-agent-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-export-zabbix-agent-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-export-zabbix-agent-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-gui-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-gui-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-gui-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-import-collectl2pcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-import-collectl2pcp-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-import-collectl2pcp-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-import-ganglia2pcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-import-iostat2pcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-import-mrtg2pcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-import-sar2pcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-libs-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-libs-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-libs-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-libs-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-libs-devel-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-libs-devel-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-manager-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-manager-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-manager-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-activemq-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-apache-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-apache-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-apache-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-bash-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-bash-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-bash-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-bcc-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-bind2-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-bonding-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-bpftrace-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-cifs-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-cifs-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-cifs-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-cisco-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-cisco-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-cisco-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-dbping-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-dm-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-dm-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-dm-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-docker-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-docker-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-docker-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-ds389-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-ds389log-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-elasticsearch-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-gfs2-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-gfs2-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-gfs2-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-gluster-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-gpfs-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-gpsd-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-hacluster-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-hacluster-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-hacluster-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-haproxy-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-infiniband-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-infiniband-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-infiniband-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-json-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-libvirt-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-lio-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-lmsensors-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-logger-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-logger-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-logger-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-lustre-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-lustrecomm-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-lustrecomm-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-lustrecomm-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-mailq-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-mailq-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-mailq-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-memcache-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-mic-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-mounts-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-mounts-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-mounts-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-mssql-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-mysql-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-named-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-netcheck-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-netfilter-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-news-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-nfsclient-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-nginx-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-nvidia-gpu-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-nvidia-gpu-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-nvidia-gpu-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-openmetrics-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-oracle-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-pdns-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-perfevent-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-perfevent-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-perfevent-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-podman-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-podman-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-podman-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-postfix-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-postgresql-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-redis-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-roomtemp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-roomtemp-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-roomtemp-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-rpm-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-rpm-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-rpm-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-rsyslog-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-samba-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-sendmail-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-sendmail-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-sendmail-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-shping-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-shping-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-shping-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-slurm-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-smart-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-smart-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-smart-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-snmp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-summary-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-summary-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-summary-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-systemd-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-systemd-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-systemd-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-trace-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-trace-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-trace-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-unbound-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-vmware-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-weblog-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-weblog-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-weblog-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-zimbra-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-pmda-zswap-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-selinux-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-system-tools-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-system-tools-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-system-tools-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-testsuite-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-testsuite-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-testsuite-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpcp-zeroconf-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedperl-PCP-LogImport-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedperl-PCP-LogImport-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedperl-PCP-LogImport-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedperl-PCP-LogSummary-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedperl-PCP-MMV-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedperl-PCP-MMV-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedperl-PCP-MMV-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedperl-PCP-PMDA-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedperl-PCP-PMDA-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedperl-PCP-PMDA-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpython3-pcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpython3-pcp-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Fixedpython3-pcp-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2024:3392
  • Workaroundpcp-0:5.0.2-8.el8_2.src as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-conf-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-debugsource-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-debugsource-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-devel-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-devel-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-devel-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-devel-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-doc-0:5.0.2-8.el8_2.noarch as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-export-pcp2elasticsearch-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-export-pcp2graphite-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-export-pcp2influxdb-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-export-pcp2json-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-export-pcp2spark-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-export-pcp2xml-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-export-pcp2zabbix-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-export-zabbix-agent-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-export-zabbix-agent-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-export-zabbix-agent-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-gui-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-gui-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-gui-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-import-collectl2pcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-import-collectl2pcp-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-import-collectl2pcp-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-import-ganglia2pcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-import-iostat2pcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-import-mrtg2pcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-import-sar2pcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-libs-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-libs-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-libs-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-libs-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-libs-devel-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-libs-devel-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-manager-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-manager-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-manager-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-activemq-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-apache-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-apache-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-apache-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-bash-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-bash-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-bash-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-bcc-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-bind2-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-bonding-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-bpftrace-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-cifs-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-cifs-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-cifs-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-cisco-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-cisco-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-cisco-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-dbping-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-dm-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-dm-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-dm-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-docker-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-docker-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-docker-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-ds389-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-ds389log-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-elasticsearch-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-gfs2-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-gfs2-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-gfs2-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-gluster-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-gpfs-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-gpsd-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-hacluster-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-hacluster-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-hacluster-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-haproxy-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-infiniband-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-infiniband-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-infiniband-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-json-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-libvirt-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-lio-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-lmsensors-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-logger-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-logger-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-logger-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-lustre-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-lustrecomm-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-lustrecomm-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-lustrecomm-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-mailq-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-mailq-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-mailq-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-memcache-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-mic-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-mounts-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-mounts-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-mounts-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-mssql-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-mysql-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-named-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-netcheck-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-netfilter-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-news-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-nfsclient-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-nginx-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-nvidia-gpu-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-nvidia-gpu-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-nvidia-gpu-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-openmetrics-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-oracle-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-pdns-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-perfevent-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-perfevent-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-perfevent-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-podman-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-podman-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-podman-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-postfix-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-postgresql-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-redis-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-roomtemp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-roomtemp-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-roomtemp-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-rpm-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-rpm-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-rpm-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-rsyslog-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-samba-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-sendmail-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-sendmail-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-sendmail-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-shping-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-shping-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-shping-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-slurm-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-smart-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-smart-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-smart-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-snmp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-summary-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-summary-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-summary-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-systemd-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-systemd-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-systemd-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-trace-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-trace-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-trace-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-unbound-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-vmware-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-weblog-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-weblog-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-weblog-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-zimbra-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-pmda-zswap-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-selinux-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-system-tools-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-system-tools-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-system-tools-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-testsuite-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-testsuite-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-testsuite-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpcp-zeroconf-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundperl-PCP-LogImport-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundperl-PCP-LogImport-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundperl-PCP-LogImport-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundperl-PCP-LogSummary-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundperl-PCP-MMV-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundperl-PCP-MMV-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundperl-PCP-MMV-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundperl-PCP-PMDA-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundperl-PCP-PMDA-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundperl-PCP-PMDA-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpython3-pcp-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpython3-pcp-debuginfo-0:5.0.2-8.el8_2.i686 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

  • Workaroundpython3-pcp-debuginfo-0:5.0.2-8.el8_2.x86_64 as a component of Red Hat Enterprise Linux AppStream AUS (v. 8.2)

    To mitigate this flaw, stop and disable the pmproxy.service or disable the Redis server backend via the pmproxy configuration file. To stop and disable the pmproxy.service, run the following command: ~~~ # systemctl disable --now pmproxy.service ~~~ To disable the Redis backend server via the pmproxy configuration file: ~~~ # sed -i 's/redis.enabled = true/redis.enabled = false/g' /etc/pcp/pmproxy/pmproxy.conf # systemctl restart pmproxy.service ~~~

scry

Advisories like this name the exposed products attackers go after on your perimeter. See what is exposed on your perimeter with a free passive scan.

Free scan