PHOENIX CONTACT: Multiple Vulnerabilities in AXC F 2152
Multiple vulnerabilities have been identified in PHOENIX CONTACT AXC F 2152 with firmware versions 1.x
describes (46)
Related CVEs.
| ID | severity | exploitable | ||
|---|---|---|---|---|
| CVE-2019-10998US | medium6.8 | — | ||
An issue was discovered on Phoenix Contact AXC F 2152 (No.2404267) before 2019.0 LTS and AXC F 2152 STARTERKIT (No.1046568) before 2019.0 LTS devices. Unlimited physical access to… | ||||
| CVE-2019-10997US | medium5.9 | — | ||
An issue was discovered on Phoenix Contact AXC F 2152 (No.2404267) before 2019.0 LTS and AXC F 2152 STARTERKIT (No.1046568) before 2019.0 LTS devices. Protocol Fuzzing on PC WORX E… | ||||
| CVE-2018-7559US | medium5.3 | — | ||
An issue was discovered in OPC UA .NET Standard Stack and Sample Code before GitHub commit 2018-04-12, and OPC UA .NET Legacy Stack and Sample Code before GitHub commit 2018-03-13.… | ||||
| CVE-2018-5388US | medium6.5 | — | ||
In stroke_socket.c in strongSwan before 5.6.3, a missing packet length check could allow a buffer underflow, which may lead to resource exhaustion and denial of service while readi… | ||||
| CVE-2018-1000301US | critical9.1 | — | ||
curl version curl 7.20.0 to and including curl 7.59.0 contains a CWE-126: Buffer Over-read vulnerability in denial of service that can result in curl can be tricked into reading da… | ||||
| CVE-2018-0737US | medium5.9OT elevated | — | ||
The OpenSSL RSA Key generation algorithm has been shown to be vulnerable to a cache timing side channel attack. An attacker with sufficient access to mount cache timing attacks dur… | ||||
| CVE-2018-1000122US | critical9.1 | — | ||
A buffer over-read exists in curl 7.20.0 to and including curl 7.58.0 in the RTSP+RTP handling code that allows an attacker to cause a denial of service or information leakage | ||||
| CVE-2018-1000121US | high7.5 | — | ||
A NULL pointer dereference exists in curl 7.21.0 to and including curl 7.58.0 in the LDAP code that allows an attacker to cause a denial of service | ||||
| CVE-2018-1000120US | critical9.8 | — | ||
A buffer overflow exists in curl 7.12.3 to and including curl 7.58.0 in the FTP URL handling that allows an attacker to cause a denial of service or worse. | ||||
| CVE-2016-9953US | critical9.8 | — | ||
The verify_certificate function in lib/vtls/schannel.c in libcurl 7.30.0 through 7.51.0, when built for Windows CE using the schannel TLS backend, allows remote attackers to obtain… | ||||
| CVE-2016-9952US | high8.1 | — | ||
The verify_certificate function in lib/vtls/schannel.c in libcurl 7.30.0 through 7.51.0, when built for Windows CE using the schannel TLS backend, makes it easier for remote attack… | ||||
| CVE-2018-1000117US | medium6.7 | Exploit | ||
Python Software Foundation CPython version From 3.2 until 3.6.4 on Windows contains a Buffer Overflow vulnerability in os.symlink() function on Windows that can result in Arbitrary… | ||||
| CVE-2018-1000005US | critical9.1 | — | ||
libcurl 7.49.0 to and including 7.57.0 contains an out bounds read in code handling HTTP/2 trailers. It was reported (https://github.com/curl/curl/pull/2231) that reading an HTTP/2… | ||||
| CVE-2015-9251US | medium6.1 | Exploit | ||
jQuery before 3.0.0 is vulnerable to Cross-site Scripting (XSS) attacks when a cross-domain Ajax request is performed without the dataType option, causing text/javascript responses… | ||||
| CVE-2017-3738US | medium5.9 | — | ||
There is an overflow bug in the AVX2 Montgomery multiplication procedure used in exponentiation with 1024-bit moduli. No EC algorithms are affected. Analysis suggests that attacks… | ||||
| CVE-2017-3737US | medium5.9OT high | — | ||
OpenSSL 1.0.2 (starting from version 1.0.2b) introduced an "error state" mechanism. The intent was that if a fatal error occurred during a handshake then OpenSSL would move into th… | ||||
| CVE-2017-8817US | critical9.8 | — | ||
The FTP wildcard function in curl and libcurl before 7.57.0 allows remote attackers to cause a denial of service (out-of-bounds read and application crash) or possibly have unspeci… | ||||
| CVE-2017-8816US | critical9.8 | — | ||
The NTLM authentication feature in curl and libcurl before 7.57.0 on 32-bit platforms allows attackers to cause a denial of service (integer overflow and resultant buffer overflow,… | ||||
| CVE-2017-1000257US | critical9.1 | — | ||
An IMAP FETCH response line indicates the size of the returned data, in number of bytes. When that response says the data is zero bytes, libcurl would pass on that (non-existing) d… | ||||
| CVE-2017-15906US | medium5.3 | — | ||
The process_open function in sftp-server.c in OpenSSH before 7.6 does not properly prevent write operations in readonly mode, which allows attackers to create zero-length files. | ||||
references
External citations — patches, advisories, analysis.
remediations (46)
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019 With Firmware Release 2019.6 an option was added to the web-based management that allows the user to permanently disable storage of configuration data to the SD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card. We recommend using this new configuration option for application scenarios where physical access to the device cannot be restricted effectively.
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019With Firmware Release 2019.6 an option was added to the web-basedmanagement that allows the user to permanently disable storage of configuration data to theSD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card.We recommend using this new configuration option for application scenarios where physicalaccess to the device cannot be restricted effectively. General Recommendation Customers using Phoenix Contact AXC F 2152 are recommended to operate the devices in closed networks or protected with a suitable firewall. For detailed information on our recommendations for measures to protect network-capable devices, please refer to our application note:'Art.-Nr. 107913: AH EN INDUSTRIAL SECURITY 'Measures to protect network-capable devices with Ethernet connection against unauthorized access'
- Fixed
Update to Firmware Release 2019.0 LTS or later. Update to PLCnext Engineer Release 2019.0 LTS or later. Update A, 30.08.2019With Firmware Release 2019.6 an option was added to the web-basedmanagement that allows the user to permanently disable storage of configuration data to theSD-Card. The device can now be operated without SD-Card and ignores any inserted SD-Card.We recommend using this new configuration option for application scenarios where physicalaccess to the device cannot be restricted effectively. General Recommendation Customers using Phoenix Contact AXC F 2152 are recommended to operate the devices in closed networks or protected with a suitable firewall. For detailed information on our recommendations for measures to protect network-capable devices, please refer to our application note:'Art.-Nr. 107913: AH EN INDUSTRIAL SECURITY 'Measures to protect network-capable devices with Ethernet connection against unauthorized access'
Advisories like this name the exposed products attackers go after on your perimeter. See what is exposed on your perimeter with a free passive scan.
Free scan