SSA-661247: Apache Log4j Vulnerabilities (Log4Shell, CVE-2021-44228, CVE-2021-45046) - Impact to Siemens Products
On 2021-12-09, a vulnerability in Apache Log4j (a logging tool used in many Java-based applications) was disclosed, that could allow remote unauthenticated attackers to execute code on vulnerable systems. The vulnerability is tracked as CVE-2021-44228 and is also known as "Log4Shell". On 2021-12-14 an additional denial of service vulnerability (CVE-2021-45046) was published rendering the initial mitigations and fix in version 2.15.0 as incomplete under certain non- default configurations. Log4j versions 2.16.0 and 2.12.2 are supposed to fix both vulnerabilities. On 2021-12-17, CVE-2021-45046 was reclassified with an increased CVSS base score (from 3.7 to 9.0). The potential impact of CVE-2021-45046 now includes - besides denial of service - also information disclosure and local (and potential remote) code execution. Siemens is currently investigating to determine which products are affected and is continuously updating this advisory as more information becomes available. See section Additional Information for more details regarding the investigation status. Note: two additional vulnerabilities were published for Apache Log4j, the impact of which are documented in SSA-501673: https://cert- portal.siemens.com/productcert/pdf/ssa-501673.pdf (CVE-2021-45105) and SSA-784507: https://cert- portal.siemens.com/productcert/pdf/ssa-784507.pdf (CVE-2021-44832).
describes (2)
Related CVEs.
| ID | severity | exploitable | ||
|---|---|---|---|---|
| CVE-2021-45046US | critical9.0OT critical | KEV | ||
It was found that the fix to address CVE-2021-44228 in Apache Log4j 2.15.0 was incomplete in certain non-default configurations. This could allows attackers with control over Threa… | ||||
| CVE-2021-44228US | critical10.0OT critical | KEV | ||
Apache Log4j2 2.0-beta9 through 2.15.0 (excluding security releases 2.12.2, 2.12.3, and 2.3.1) JNDI features used in configuration, log messages, and parameters do not protect agai… | ||||
references
External citations — patches, advisories, analysis.
- SSA-661247: Apache Log4j Vulnerabilities (Log4Shell, CVE-2021-44228, CVE-2021-45046) - Impact to Siemens Products - CSAF Versionself
- SSA-661247: Apache Log4j Vulnerabilities (Log4Shell, CVE-2021-44228, CVE-2021-45046) - Impact to Siemens Products - PDF Versionself
- SSA-661247: Apache Log4j Vulnerabilities (Log4Shell, CVE-2021-44228, CVE-2021-45046) - Impact to Siemens Products - TXT Versionself
remediations (558)
- MitigationAdvantage Navigator Energy & Sustainability
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationAdvantage Navigator Energy & Sustainability
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationAdvantage Navigator Software Proxy V6
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationAdvantage Navigator Software Proxy V6
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationBuilding Operator Discovery Distribution for the Connect X200 Gateway
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationBuilding Operator Discovery Distribution for the Connect X200 Gateway
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationBuilding Operator Discovery Distribution for the Connect X300 Gateway
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationBuilding Operator Discovery Distribution for the Connect X300 Gateway
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationBuilding Twin - 360° Viewer
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationBuilding Twin - 360° Viewer
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationCOMOS
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationCOMOS
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationCapital V2019.1
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationCapital V2019.1
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationCapital V2020.1
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationCapital V2020.1
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationCapital V2021.1
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationCapital V2021.1
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationCerberus DMS V5.0
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationCerberus DMS V5.0
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationCerberus DMS V5.1
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationCerberus DMS V5.1
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationDesigo CC V3.0
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationDesigo CC V3.0
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationDesigo CC V4.0
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationDesigo CC V4.0
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationDesigo CC V4.1
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationDesigo CC V4.1
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationDesigo CC V4.2
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationDesigo CC V4.2
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationDesigo CC V5.0
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationDesigo CC V5.0
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationDesigo CC V5.1
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationDesigo CC V5.1
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationE-Car OC Cloud Application
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationE-Car OC Cloud Application
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationEnergy Engage
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationEnergy Engage
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationEnergyIP
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationEnergyIP
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationEnergyIP Prepay
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationEnlighted Amaze
For Comfy and Enlighted, see also chapter Additional Information below
- MitigationEnlighted Amaze
For Comfy and Enlighted, see also chapter Additional Information below
- MitigationEnlighted Where
For Comfy and Enlighted, see also chapter Additional Information below
- MitigationEnlighted Where
For Comfy and Enlighted, see also chapter Additional Information below
- MitigationGMA-Manager
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationGMA-Manager
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationGeolus Shape Search V10
Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8601468
- MitigationGeolus Shape Search V10
Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8601468
- MitigationGeolus Shape Search V11
Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8601468
- MitigationGeolus Shape Search V11
Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8601468
- MitigationHEEDS Connect
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationHEEDS Connect
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationHES UDIS
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationHES UDIS
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationIndustrial Edge Hub
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationIndustrial Edge Hub
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationIndustrial Edge Management App (IEM-App)
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationIndustrial Edge Management App (IEM-App)
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationIndustrial Edge Management OS (IEM-OS)
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationIndustrial Edge Management OS (IEM-OS)
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationMendix Applications
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationMendix Applications
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationMindSphere App Management Cockpits (Developer& Operator)
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationMindSphere App Management Cockpits (Developer& Operator)
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationMindSphere Asset Manager
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationMindSphere Asset Manager
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationMindSphere IAM (User Management/ Settings)
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationMindSphere IAM (User Management/ Settings)
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationMindSphere Integrated Data Lake
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationMindSphere Integrated Data Lake
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationMindSphere Notification Service
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationMindSphere Notification Service
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationMindSphere Predictive Learning
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationMindSphere Predictive Learning
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationMindSphere Usage Transparency Service
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationMindSphere Usage Transparency Service
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationMindSphere Visual Explorer
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationMindSphere Visual Explorer
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationMindsphere Cloud Foundry
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationMindsphere Cloud Foundry
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationMindsphere Cloud Platform
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationMindsphere Cloud Platform
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationNX 1953 Series
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationNX 1953 Series
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationNX 1980 Series
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationNX 1980 Series
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationNX 2007 Series
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationNX 2007 Series
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationNXpower Monitor
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationNXpower Monitor
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationOpcenter EX CP Process Automation Control
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationOpcenter EX CP Process Automation Control
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationOpcenter Execution Core Process Automation Control
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationOpcenter Execution Core Process Automation Control
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationOpcenter Intelligence
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationOpcenter Intelligence
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationOperation Scheduler
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationOperation Scheduler
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSENTRON powermanager V4
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSENTRON powermanager V4
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSIGUARD DSA
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSIGUARD DSA
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSIMATIC IPC1047
Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC
- MitigationSIMATIC IPC1047
Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC
- MitigationSIMATIC IPC1047E
Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC
- MitigationSIMATIC IPC1047E
Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC
- MitigationSIMATIC IPC647D
Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC
- MitigationSIMATIC IPC647D
Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC
- MitigationSIMATIC IPC647E
Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC
- MitigationSIMATIC IPC647E
Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC
- MitigationSIMATIC IPC847D
Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC
- MitigationSIMATIC IPC847D
Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC
- MitigationSIMATIC IPC847E
Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC
- MitigationSIMATIC IPC847E
Disable ports 8080/tcp and 8443/tcp in the firewall configuration of the IPC
- MitigationSiPass integrated V2.80
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSiPass integrated V2.80
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSiPass integrated V2.85
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSiPass integrated V2.85
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSimcenter 3D
Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8601203
- MitigationSimcenter 3D
Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8601203
- MitigationSimcenter Amesim
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSimcenter Amesim
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSimcenter System Architect
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSimcenter System Architect
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSimcenter System Simulation Client for Git
Find detailed mitigation steps for both server and client installations at: https://support.sw.siemens.com/en-US/knowledge- base/PL8602538
- MitigationSimcenter System Simulation Client for Git
Find detailed mitigation steps for both server and client installations at: https://support.sw.siemens.com/en-US/knowledge- base/PL8602538
- MitigationSimcenter Testlab
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSimcenter Testlab
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSimcenter Testlab Data Management
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSimcenter Testlab Data Management
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSiveillance Command
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSiveillance Command
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSiveillance Control Pro V2.1
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSiveillance Control Pro V2.1
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSiveillance Control Pro V2.2
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSiveillance Control Pro V2.2
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSiveillance Control Pro V2.3
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSiveillance Control Pro V2.3
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSiveillance Identity V1.5
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSiveillance Identity V1.5
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSiveillance Identity V1.6
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSiveillance Identity V1.6
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSiveillance Vantage
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSiveillance Vantage
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSolid Edge CAM Pro
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSolid Edge CAM Pro
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSolid Edge Wiring and Harness Design
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationSolid Edge Wiring and Harness Design
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationSpectrum Power 4
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSpectrum Power 4
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationSpectrum Power 7
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationSpectrum Power 7
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Active Workspace V4.3
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Active Workspace V4.3
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Active Workspace V5.0
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Active Workspace V5.0
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Active Workspace V5.1
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Active Workspace V5.1
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Active Workspace V5.2
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Active Workspace V5.2
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Deployment Center V4.0
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Deployment Center V4.0
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Deployment Center V4.1
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Deployment Center V4.1
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Deployment Center V4.2
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Deployment Center V4.2
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter EDA V5.1
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter EDA V5.1
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter EDA V5.2
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter EDA V5.2
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Integration Framework V13.0
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Integration Framework V13.0
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Integration Framework V13.1
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Integration Framework V13.1
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Integration Framework V13.2
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Integration Framework V13.2
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Integration Framework V3.3
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Integration Framework V3.3
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Integration Framework V4.0
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Integration Framework V4.0
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Integration for CATIA
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Integration for CATIA
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter MBSE Gateway V4.1
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter MBSE Gateway V4.1
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter MBSE Gateway V4.2
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter MBSE Gateway V4.2
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter MBSE Gateway V4.3
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter MBSE Gateway V4.3
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter MBSE Gateway V5.0
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter MBSE Gateway V5.0
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter MBSE Gateway V5.1
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter MBSE Gateway V5.1
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter MBSE Gateway V5.2
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter MBSE Gateway V5.2
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Microservices Framework V5.1
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Microservices Framework V5.1
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Microservices Framework V5.2
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Microservices Framework V5.2
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Reporting and Analytics V11
Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8600700
- MitigationTeamcenter Reporting and Analytics V11
Find detailed remediation and mitigation information at: https://support.sw.siemens.com/en-US/knowledge-base/PL8600700
- MitigationTeamcenter Reporting and Analytics V12.2
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Reporting and Analytics V12.2
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Reporting and Analytics V12.3
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Reporting and Analytics V12.3
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Reporting and Analytics V12.4
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Reporting and Analytics V12.4
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Reporting and Analytics V13
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Reporting and Analytics V13
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter Technical Publishing
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter Technical Publishing
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter V12.1
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter V12.1
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter V12.2
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter V12.2
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter V12.3
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter V12.3
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter V12.4
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter V12.4
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter V13.0
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter V13.0
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter V13.1
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter V13.1
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter V13.2
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter V13.2
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTeamcenter V13.3
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTeamcenter V13.3
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTecnomatix Intosite
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTecnomatix Intosite
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTecnomatix Plant Simulation
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTecnomatix Plant Simulation
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTecnomatix Process Designer
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTecnomatix Process Designer
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTecnomatix Process Simulate
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTecnomatix Process Simulate
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTecnomatix Process Simulate VCLite
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTecnomatix Process Simulate VCLite
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTecnomatix RobotExpert
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTecnomatix RobotExpert
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationTecnomatix eBOP Manager Server
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationTecnomatix eBOP Manager Server
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationValor Parts Library - VPL Direct
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationValor Parts Library - VPL Direct
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationValor Parts Library - VPL Server or Service
Find detailed remediation and mitigation information at: https://support.sw.siemens.com/knowledge-base/MG618362
- MitigationValor Parts Library - VPL Server or Service
Find detailed remediation and mitigation information at: https://support.sw.siemens.com/knowledge-base/MG618362
- MitigationVeSys V2019.1
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationVeSys V2019.1
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationVeSys V2020.1
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationVeSys V2020.1
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationVeSys V2021.1
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationVeSys V2021.1
Find detailed mitigation steps at: https://support.sw.siemens.com/en- US/knowledge-base/MG618363
- MitigationXpedition Enterprise (XCR) VX.2.10
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition Enterprise (XCR) VX.2.10
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition Enterprise VX.2.10
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition Enterprise VX.2.10
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition Enterprise VX.2.6
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationXpedition Enterprise VX.2.6
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationXpedition Enterprise VX.2.7
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition Enterprise VX.2.7
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition Enterprise VX.2.8
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition Enterprise VX.2.8
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition IC Packaging (XCR) VX.2.10
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition IC Packaging (XCR) VX.2.10
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition IC Packaging VX.2.10
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition IC Packaging VX.2.10
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition IC Packaging VX.2.6
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationXpedition IC Packaging VX.2.6
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationXpedition IC Packaging VX.2.7
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition IC Packaging VX.2.7
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition IC Packaging VX.2.8
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationXpedition IC Packaging VX.2.8
Additional information is available at https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343
- MitigationcRSP
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationcRSP
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationcRSP Operator Client Starter
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationcRSP Operator Client Starter
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationjROS for Spectrum Power 4
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationjROS for Spectrum Power 4
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- MitigationjROS for Spectrum Power 7
If the specific Siemens product allows it: Remove the JndiLookup class from the classpath: 'zip -q -d log4j-core-*.jar org/apache/logging/log4j/core/lookup/JndiLookup.class'. This measure mitigates both CVE-2021-44228 and CVE-2021-45046. Note: in case you reinstall or update the product to a yet unfixed version later: check if the vulnerable JndiLookup class has to be removed again.
- MitigationjROS for Spectrum Power 7
If, for a particular product listed in the table above, no remediation or specific mitigation is given: Block both incoming and outgoing connections between the system and the Internet.
- No fix plannedVeSys V2019.1
Currently no fix is planned
- No fix plannedVeSys V2019.1
Currently no fix is planned
- FixedAdvantage Navigator Energy & Sustainability
Vulnerability CVE-2021-44228 fixed on central cloud service starting 2021-12-13; no user actions necessary
- FixedAdvantage Navigator Energy & Sustainability
Vulnerability CVE-2021-44228 fixed on central cloud service starting 2021-12-13; no user actions necessary
- FixedAdvantage Navigator Software Proxy V6
Update to V6.3 or later version
- FixedAdvantage Navigator Software Proxy V6
Update to V6.3 or later version
- FixedBuilding Operator Discovery Distribution for the Connect X200 Gateway
Update to V3.0.30 or later version
https://support.industry.siemens.com/cs/ww/en/view/109805593/ - FixedBuilding Operator Discovery Distribution for the Connect X200 Gateway
Update to V3.0.30 or later version
https://support.industry.siemens.com/cs/ww/en/view/109805593/ - FixedBuilding Operator Discovery Distribution for the Connect X300 Gateway
Update to V3.0.29 or later version
https://support.industry.siemens.com/cs/ww/en/view/109805593/ - FixedBuilding Operator Discovery Distribution for the Connect X300 Gateway
Update to V3.0.29 or later version
https://support.industry.siemens.com/cs/ww/en/view/109805593/ - FixedBuilding Twin - 360° Viewer
Vulnerability CVE-2021-44228 fixed on central cloud service; no user actions necessary
- FixedBuilding Twin - 360° Viewer
Vulnerability CVE-2021-44228 fixed on central cloud service; no user actions necessary
- FixedCOMOS
Update to V10.4.2 or later version
https://support.industry.siemens.com/cs/ww/en/view/109812011/ - FixedCOMOS
Update to V10.4.2 or later version
https://support.industry.siemens.com/cs/ww/en/view/109812011/ - FixedCapital V2019.1
Update to V2019.1 SP2204 or later version
https://support.sw.siemens.com/en- US/product/861057055/downloads - FixedCapital V2019.1
Update to V2019.1 SP2204 or later version
https://support.sw.siemens.com/en- US/product/861057055/downloads - FixedCapital V2020.1
Update to V2020.1 SP2202 or later version
https://support.sw.siemens.com/en- US/product/861057055/downloads - FixedCapital V2020.1
Update to V2020.1 SP2202 or later version
https://support.sw.siemens.com/en- US/product/861057055/downloads - FixedCapital V2021.1
Update to V2021.1 SP2202 or later version
https://support.sw.siemens.com/en- US/product/861057055/downloads - FixedCapital V2021.1
Update to V2021.1 SP2202 or later version
https://support.sw.siemens.com/en- US/product/861057055/downloads - FixedCerberus DMS V5.0
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedCerberus DMS V5.0
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedCerberus DMS V5.1
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedCerberus DMS V5.1
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedDesigo CC V3.0
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedDesigo CC V3.0
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedDesigo CC V4.0
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedDesigo CC V4.0
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedDesigo CC V4.1
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedDesigo CC V4.1
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedDesigo CC V4.2
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedDesigo CC V4.2
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedDesigo CC V5.0
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedDesigo CC V5.0
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805562/
- FixedDesigo CC V5.1
Update to V5.1 QU1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109807893/ - FixedDesigo CC V5.1
Update to V5.1 QU1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109807893/ - FixedE-Car OC Cloud Application
Vulnerability CVE-2021-44228 fixed on central cloud service starting 2021-12-13; no user actions necessary
- FixedE-Car OC Cloud Application
Vulnerability CVE-2021-44228 fixed on central cloud service starting 2021-12-13; no user actions necessary
- FixedEnergy Engage
Find detailed remediation and mitigation information on the EnergyIP docs portal at: https://docs.emeter.com/display/public/WELCOME/Energy IP+Security+Advisory+for+Log4Shell+Vulnerability
- FixedEnergy Engage
Find detailed remediation and mitigation information on the EnergyIP docs portal at: https://docs.emeter.com/display/public/WELCOME/Energy IP+Security+Advisory+for+Log4Shell+Vulnerability
- FixedEnergyIP
Find detailed remediation and mitigation information on the EnergyIP docs portal at: https://docs.emeter.com/display/public/WELCOME/Energy IP+Security+Advisory+for+Log4Shell+Vulnerability
- FixedEnergyIP
Find detailed remediation and mitigation information on the EnergyIP docs portal at: https://docs.emeter.com/display/public/WELCOME/Energy IP+Security+Advisory+for+Log4Shell+Vulnerability
- FixedEnergyIP Prepay
Update to V3.8.0.12 or later version
- FixedEnlighted Amaze
Vulnerabilities fixed on central cloud services starting 2021-12-10; no user actions necessary
- FixedEnlighted Amaze
Vulnerabilities fixed on central cloud services starting 2021-12-10; no user actions necessary
- FixedEnlighted Where
Vulnerabilities fixed on central cloud services starting 2021-12-11; no user actions necessary
- FixedEnlighted Where
Vulnerabilities fixed on central cloud services starting 2021-12-11; no user actions necessary
- FixedGMA-Manager
Update to V8.6.2.472 or later version
https://support.industry.siemens.com/cs/ww/en/view/109805665/ - FixedGMA-Manager
Update to V8.6.2.472 or later version
https://support.industry.siemens.com/cs/ww/en/view/109805665/ - FixedGeolus Shape Search V10
Remove the JndiLookup class from the classpath.
- FixedGeolus Shape Search V10
Remove the JndiLookup class from the classpath.
- FixedGeolus Shape Search V11
Remove the JndiLookup class from the classpath.
- FixedGeolus Shape Search V11
Remove the JndiLookup class from the classpath.
- FixedHEEDS Connect
HEEDS Connect team will contact all impacted customers to deploy a new log4j version. This action will secure your installation against Log4Shell vulnerability. For further information see: https://support.sw.siemens.com/en-US/knowledge-base/PL8601661
- FixedHEEDS Connect
HEEDS Connect team will contact all impacted customers to deploy a new log4j version. This action will secure your installation against Log4Shell vulnerability. For further information see: https://support.sw.siemens.com/en-US/knowledge-base/PL8601661
- FixedHES UDIS
Specific fix versions based on V6.0.2 and V6.0.3 were released and deployed for all affected projects
- FixedHES UDIS
Specific fix versions based on V6.0.2 and V6.0.3 were released and deployed for all affected projects
- FixedIndustrial Edge Hub
Vulnerabilities fixed on central cloud service starting 2021-12-13; no user actions necessary
- FixedIndustrial Edge Hub
Vulnerabilities fixed on central cloud service starting 2021-12-13; no user actions necessary
- FixedIndustrial Edge Management App (IEM-App)
Update to V1.4.11 or later version
https://iehub.eu1.edge.siemens.cloud/ - FixedIndustrial Edge Management App (IEM-App)
Update to V1.4.11 or later version
https://iehub.eu1.edge.siemens.cloud/ - FixedIndustrial Edge Management OS (IEM-OS)
Update to V1.4.0-42 or later version
https://iehub.eu1.edge.siemens.cloud/ - FixedIndustrial Edge Management OS (IEM-OS)
Update to V1.4.0-42 or later version
https://iehub.eu1.edge.siemens.cloud/ - FixedMendix Applications
Although the Mendix runtime itself is not vulnerable to this exploit, we nevertheless recommend to upgrade log4j-core to the latest available version if log4j-core is part of your project. This advice is regardless of the JRE/JDK version the app runs on.
https://status.mendix.com/incidents/8j5043my610c - FixedMendix Applications
Although the Mendix runtime itself is not vulnerable to this exploit, we nevertheless recommend to upgrade log4j-core to the latest available version if log4j-core is part of your project. This advice is regardless of the JRE/JDK version the app runs on.
https://status.mendix.com/incidents/8j5043my610c - FixedMindSphere App Management Cockpits (Developer& Operator)
Vulnerabilities fixed with update on 2021-12-16; no user actions necessary
- FixedMindSphere App Management Cockpits (Developer& Operator)
Vulnerabilities fixed with update on 2021-12-16; no user actions necessary
- FixedMindSphere Asset Manager
Vulnerabilities fixed with update on 2021-12-16; no user actions necessary
- FixedMindSphere Asset Manager
Vulnerabilities fixed with update on 2021-12-16; no user actions necessary
- FixedMindSphere IAM (User Management/ Settings)
Vulnerabilities fixed with update on 2021-12-16; no user actions necessary
- FixedMindSphere IAM (User Management/ Settings)
Vulnerabilities fixed with update on 2021-12-16; no user actions necessary
- FixedMindSphere Integrated Data Lake
Vulnerabilities fixed with update on 2021-12-16; no user actions necessary
- FixedMindSphere Integrated Data Lake
Vulnerabilities fixed with update on 2021-12-16; no user actions necessary
- FixedMindSphere Notification Service
Vulnerabilities fixed with update on 2021-12-16; no user actions necessary
- FixedMindSphere Notification Service
Vulnerabilities fixed with update on 2021-12-16; no user actions necessary
- FixedMindSphere Predictive Learning
Vulnerabilities fixed with update on 2021-12-23; no user actions necessary
- FixedMindSphere Predictive Learning
Vulnerabilities fixed with update on 2021-12-23; no user actions necessary
- FixedMindSphere Usage Transparency Service
Vulnerabilities fixed with update on 2021-12-16; no user actions necessary
- FixedMindSphere Usage Transparency Service
Vulnerabilities fixed with update on 2021-12-16; no user actions necessary
- FixedMindSphere Visual Explorer
Vulnerabilities fixed with update on 2021-12-21; no user actions necessary
- FixedMindSphere Visual Explorer
Vulnerabilities fixed with update on 2021-12-21; no user actions necessary
- FixedMindsphere Cloud Foundry
Although the Cloud Foundry environment itself is not vulnerable to this exploit, we nevertheless recommend to upgrade log4j-core to the latest available version if log4j-core is part of your project. https://support.sw.siemens.com/en-US/product/268530510/knowledge- base/PL8600797
- FixedMindsphere Cloud Foundry
Although the Cloud Foundry environment itself is not vulnerable to this exploit, we nevertheless recommend to upgrade log4j-core to the latest available version if log4j-core is part of your project. https://support.sw.siemens.com/en-US/product/268530510/knowledge- base/PL8600797
- FixedMindsphere Cloud Platform
Vulnerabilities fixed on central cloud service starting 2021-12-11; no user actions necessary
- FixedMindsphere Cloud Platform
Vulnerabilities fixed on central cloud service starting 2021-12-11; no user actions necessary
- FixedNX 1953 Series
Update to V1973.4340 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600959 - FixedNX 1953 Series
Update to V1973.4340 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600959 - FixedNX 1980 Series
Update to V2000.3400 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600959 - FixedNX 1980 Series
Update to V2000.3400 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600959 - FixedNX 2007 Series
Update to V2008 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600959 - FixedNX 2007 Series
Update to V2008 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600959 - FixedNXpower Monitor
Vulnerabilities fixed on central cloud service starting 2021-12-19; no user actions necessary
- FixedNXpower Monitor
Vulnerabilities fixed on central cloud service starting 2021-12-19; no user actions necessary
- FixedOpcenter EX CP Process Automation Control
Update to V18.1 or later version to fix CVE-2021-44228
- FixedOpcenter EX CP Process Automation Control
Update to V18.1 or later version to fix CVE-2021-44228
- FixedOpcenter Execution Core Process Automation Control
Update to V18.1 or later version to fix CVE-2021-44228
- FixedOpcenter Execution Core Process Automation Control
Update to V18.1 or later version to fix CVE-2021-44228
- FixedOpcenter Intelligence
Update to V3.5 or later version
https://support.sw.siemens.com/ - FixedOpcenter Intelligence
Update to V3.5 or later version
https://support.sw.siemens.com/ - FixedOperation Scheduler
Update the UAA component to V75.8.3
https://support.industry.siemens.com/cs/ww/en/view/109805673/ - FixedOperation Scheduler
Update the UAA component to V75.8.3
https://support.industry.siemens.com/cs/ww/en/view/109805673/ - FixedSENTRON powermanager V4
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805602/
- FixedSENTRON powermanager V4
Remove the JndiLookup class from the classpath. Detailed instructions are available at https://support.industry.siemens.com/cs/ww/en/view/109805602/
- FixedSIGUARD DSA
Update to V4.4.1 or later version
- FixedSIGUARD DSA
Update to V4.4.1 or later version
- FixedSIMATIC IPC1047
Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/
- FixedSIMATIC IPC1047
Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/
- FixedSIMATIC IPC1047E
Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/
- FixedSIMATIC IPC1047E
Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/
- FixedSIMATIC IPC647D
Follow the remediation steps documented at https://ask.adaptec.com/app/answers/detail/a_id/17527/
- FixedSIMATIC IPC647D
Follow the remediation steps documented at https://ask.adaptec.com/app/answers/detail/a_id/17527/
- FixedSIMATIC IPC647E
Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/
- FixedSIMATIC IPC647E
Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/
- FixedSIMATIC IPC847D
Follow the remediation steps documented at https://ask.adaptec.com/app/answers/detail/a_id/17527/
- FixedSIMATIC IPC847D
Follow the remediation steps documented at https://ask.adaptec.com/app/answers/detail/a_id/17527/
- FixedSIMATIC IPC847E
Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/
- FixedSIMATIC IPC847E
Update the driver for the SmartRAID controller to V2.6.6 or later version, available at https://storage.microsemi.com/en- us/support/raid/sas_raid/asr-3151-4i/
- FixedSiPass integrated V2.80
Apply the patch
https://support.industry.siemens.com/cs/ww/en/view/109805711/ - FixedSiPass integrated V2.80
Apply the patch
https://support.industry.siemens.com/cs/ww/en/view/109805711/ - FixedSiPass integrated V2.85
Update to V2.85.7.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109801507/ - FixedSiPass integrated V2.85
Update to V2.85.7.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109801507/ - FixedSimcenter 3D
Update to 2022.1-2008 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8603477 - FixedSimcenter 3D
Update to 2022.1-2008 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8603477 - FixedSimcenter Amesim
Update Teamcenter to any fix version available for the different version lines of Teamcenter, see https://support.sw.siemens.com/en- US/knowledge-base/PL8600700
https://support.sw.siemens.com/en-US/knowledge- base/PL8601572 - FixedSimcenter Amesim
Update Teamcenter to any fix version available for the different version lines of Teamcenter, see https://support.sw.siemens.com/en- US/knowledge-base/PL8600700
https://support.sw.siemens.com/en-US/knowledge- base/PL8601572 - FixedSimcenter System Architect
Update Teamcenter to any fix version available for the different version lines of Teamcenter, see https://support.sw.siemens.com/en- US/knowledge-base/PL8600700
https://support.sw.siemens.com/en-US/knowledge- base/PL8601662 - FixedSimcenter System Architect
Update Teamcenter to any fix version available for the different version lines of Teamcenter, see https://support.sw.siemens.com/en- US/knowledge-base/PL8600700
https://support.sw.siemens.com/en-US/knowledge- base/PL8601662 - FixedSimcenter System Simulation Client for Git
Update to V2021.2.2 or later version
https://support.sw.siemens.com - FixedSimcenter System Simulation Client for Git
Update to V2021.2.2 or later version
https://support.sw.siemens.com - FixedSimcenter Testlab
Follow the remediation steps documented at: https://support.sw.siemens.com/en-US/knowledge-base/PL8602466
- FixedSimcenter Testlab
Follow the remediation steps documented at: https://support.sw.siemens.com/en-US/knowledge-base/PL8602466
- FixedSimcenter Testlab Data Management
Simcenter Testlab Data Management team will contact all impacted customer to deploy the mitigation measures. This action will secure your installation against Log4Shell vulnerability. For further information see: https://support.sw.siemens.com/en-US/knowledge- base/PL8601418
- FixedSimcenter Testlab Data Management
Simcenter Testlab Data Management team will contact all impacted customer to deploy the mitigation measures. This action will secure your installation against Log4Shell vulnerability. For further information see: https://support.sw.siemens.com/en-US/knowledge- base/PL8601418
- FixedSiveillance Command
Vulnerabilities fixed for Command installations on a project basis; no user actions necessary
- FixedSiveillance Command
Vulnerabilities fixed for Command installations on a project basis; no user actions necessary
- FixedSiveillance Control Pro V2.1
A hotfix is available; please contact customer support to receive the hotfix
- FixedSiveillance Control Pro V2.1
A hotfix is available; please contact customer support to receive the hotfix
- FixedSiveillance Control Pro V2.2
Update to V2.2.7 or later version; please contact customer support to receive the latest version
- FixedSiveillance Control Pro V2.2
Update to V2.2.7 or later version; please contact customer support to receive the latest version
- FixedSiveillance Control Pro V2.3
Update to V2.3.2 or later version; please contact customer support to receive the latest version
- FixedSiveillance Control Pro V2.3
Update to V2.3.2 or later version; please contact customer support to receive the latest version
- FixedSiveillance Identity V1.5
Update to V1.5 SP4 and apply the patch
https://support.industry.siemens.com/cs/ww/en/view/109805657/ - FixedSiveillance Identity V1.5
Update to V1.5 SP4 and apply the patch
https://support.industry.siemens.com/cs/ww/en/view/109805657/ - FixedSiveillance Identity V1.6
Update to V1.6 SP1 and apply the patch
https://support.industry.siemens.com/cs/ww/en/view/109805657/ - FixedSiveillance Identity V1.6
Update to V1.6 SP1 and apply the patch
https://support.industry.siemens.com/cs/ww/en/view/109805657/ - FixedSiveillance Vantage
Vulnerabilities fixed for Vantage installations on a project basis; no user actions necessary
- FixedSiveillance Vantage
Vulnerabilities fixed for Vantage installations on a project basis; no user actions necessary
- FixedSolid Edge CAM Pro
Update to V2008 or later version
https://support.sw.siemens.com/ - FixedSolid Edge CAM Pro
Update to V2008 or later version
https://support.sw.siemens.com/ - FixedSolid Edge Wiring and Harness Design
Update to V2022 SP2202 or later version
https://support.sw.siemens.com/en- US/product/246738425/downloads - FixedSolid Edge Wiring and Harness Design
Update to V2022 SP2202 or later version
https://support.sw.siemens.com/en- US/product/246738425/downloads - FixedSpectrum Power 4
Update to V4.70 SP9 and apply Security Patch 1. Please contact your local Siemens representative.
- FixedSpectrum Power 4
Update to V4.70 SP9 and apply Security Patch 1. Please contact your local Siemens representative.
- FixedSpectrum Power 7
Update to V21Q4 and apply the patch. Please contact your local Siemens representative.
- FixedSpectrum Power 7
Update to V21Q4 and apply the patch. Please contact your local Siemens representative.
- FixedTeamcenter Active Workspace V4.3
Update to V4.3.13 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Active Workspace V4.3
Update to V4.3.13 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Active Workspace V5.0
Update to V5.0.11 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Active Workspace V5.0
Update to V5.0.11 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Active Workspace V5.1
Update to V5.1.8 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Active Workspace V5.1
Update to V5.1.8 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Active Workspace V5.2
Update to V5.2.6 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Active Workspace V5.2
Update to V5.2.6 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Deployment Center V4.0
Update to V4.0.3 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Deployment Center V4.0
Update to V4.0.3 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Deployment Center V4.1
Update to V4.1.1.1 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Deployment Center V4.1
Update to V4.1.1.1 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Deployment Center V4.2
Update to V4.2.0.2 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Deployment Center V4.2
Update to V4.2.0.2 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter EDA V5.1
Update to V5.1.5 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter EDA V5.1
Update to V5.1.5 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter EDA V5.2
Update to V5.2.3 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter EDA V5.2
Update to V5.2.3 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Integration Framework V13.0
Update to V13.0.0.2 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Integration Framework V13.0
Update to V13.0.0.2 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Integration Framework V13.1
Update to V13.1.0.1 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Integration Framework V13.1
Update to V13.1.0.1 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Integration Framework V13.2
Update to V13.2.0.1 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Integration Framework V13.2
Update to V13.2.0.1 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Integration Framework V3.3
Update to V3.3.0.7 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Integration Framework V3.3
Update to V3.3.0.7 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Integration Framework V4.0
Update to V4.0.0.2 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Integration Framework V4.0
Update to V4.0.0.2 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Integration for CATIA
Update to V13.0.1.2 or later version
https://support.sw.siemens.com/knowledge- base/PL8602463 - FixedTeamcenter Integration for CATIA
Update to V13.0.1.2 or later version
https://support.sw.siemens.com/knowledge- base/PL8602463 - FixedTeamcenter MBSE Gateway V4.1
Update to V4.1.2 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter MBSE Gateway V4.1
Update to V4.1.2 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter MBSE Gateway V4.2
Update to V4.2.3 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter MBSE Gateway V4.2
Update to V4.2.3 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter MBSE Gateway V4.3
Update to V4.3.3 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter MBSE Gateway V4.3
Update to V4.3.3 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter MBSE Gateway V5.0
Update to V5.0.6 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter MBSE Gateway V5.0
Update to V5.0.6 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter MBSE Gateway V5.1
Update to V5.1.5 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter MBSE Gateway V5.1
Update to V5.1.5 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter MBSE Gateway V5.2
Update to V5.2.4 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter MBSE Gateway V5.2
Update to V5.2.4 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Microservices Framework V5.1
Update to V5.1.8 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Microservices Framework V5.1
Update to V5.1.8 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Microservices Framework V5.2
Update to V5.2.6 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Microservices Framework V5.2
Update to V5.2.6 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter Reporting and Analytics V11
Remove the JndiLookup class from the classpath.
- FixedTeamcenter Reporting and Analytics V11
Remove the JndiLookup class from the classpath.
- FixedTeamcenter Reporting and Analytics V12.2
Update to V12.2.8 or later version
https://support.sw.siemens.com/enUS/knowledge- base/PL8600700 - FixedTeamcenter Reporting and Analytics V12.2
Update to V12.2.8 or later version
https://support.sw.siemens.com/enUS/knowledge- base/PL8600700 - FixedTeamcenter Reporting and Analytics V12.3
Update to V12.3.11 or later version
https://support.sw.siemens.com/enUS/knowledge- base/PL8600700 - FixedTeamcenter Reporting and Analytics V12.3
Update to V12.3.11 or later version
https://support.sw.siemens.com/enUS/knowledge- base/PL8600700 - FixedTeamcenter Reporting and Analytics V12.4
Update to V12.4.1 or later version
https://support.sw.siemens.com/enUS/knowledge- base/PL8600700 - FixedTeamcenter Reporting and Analytics V12.4
Update to V12.4.1 or later version
https://support.sw.siemens.com/enUS/knowledge- base/PL8600700 - FixedTeamcenter Reporting and Analytics V13
Update to V13.2.1.1 or V13.3.0.0 or later version
https://support.sw.siemens.com/enUS/knowledge- base/PL8600700 - FixedTeamcenter Reporting and Analytics V13
Update to V13.2.1.1 or V13.3.0.0 or later version
https://support.sw.siemens.com/enUS/knowledge- base/PL8600700 - FixedTeamcenter Technical Publishing
Update to V13.0.1 or later version
https://support.sw.siemens.com/knowledge- base/PL8612040 - FixedTeamcenter Technical Publishing
Update to V13.0.1 or later version
https://support.sw.siemens.com/knowledge- base/PL8612040 - FixedTeamcenter V12.1
Update to V12.1.0.14 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V12.1
Update to V12.1.0.14 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V12.2
Update to V12.2.0.18 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V12.2
Update to V12.2.0.18 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V12.3
Update to V12.3.0.15 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V12.3
Update to V12.3.0.15 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V12.4
Update to V12.4.0.12 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V12.4
Update to V12.4.0.12 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V13.0
Update to V13.0.0.9 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V13.0
Update to V13.0.0.9 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V13.1
Update to V13.1.0.8 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V13.1
Update to V13.1.0.8 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V13.2
Update to V13.2.0.6 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V13.2
Update to V13.2.0.6 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V13.3
Update to V13.3.0.1 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTeamcenter V13.3
Update to V13.3.0.1 or later version
https://support.sw.siemens.com/en-US/knowledge- base/PL8600700 - FixedTecnomatix Intosite
Vulnerabilities fixed on central cloud service; no user actions necessary
- FixedTecnomatix Intosite
Vulnerabilities fixed on central cloud service; no user actions necessary
- FixedTecnomatix Plant Simulation
Download and install the updated TCCS setup from the Siemens Support Center; for details see https://support.sw.siemens.com/knowledge- base/PL8615527
- FixedTecnomatix Plant Simulation
Download and install the updated TCCS setup from the Siemens Support Center; for details see https://support.sw.siemens.com/knowledge- base/PL8615527
- FixedTecnomatix Process Designer
Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2
https://support.sw.siemens.com/en-US/knowledge- base/PL8602057 - FixedTecnomatix Process Designer
Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2
https://support.sw.siemens.com/en-US/knowledge- base/PL8602057 - FixedTecnomatix Process Simulate
Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2
https://support.sw.siemens.com/en-US/knowledge- base/PL8602057 - FixedTecnomatix Process Simulate
Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2
https://support.sw.siemens.com/en-US/knowledge- base/PL8602057 - FixedTecnomatix Process Simulate VCLite
Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2
https://support.sw.siemens.com/en-US/knowledge- base/PL8602057 - FixedTecnomatix Process Simulate VCLite
Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2
https://support.sw.siemens.com/en-US/knowledge- base/PL8602057 - FixedTecnomatix RobotExpert
Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2
https://support.sw.siemens.com/en-US/knowledge- base/PL8602057 - FixedTecnomatix RobotExpert
Apply the hotfix, available for versions V14.1, V15.0, V15.1, V15.1.2, V16.0, V16.0.1, V16.0.2, V16.1, V16.1.1, V16.1.2
https://support.sw.siemens.com/en-US/knowledge- base/PL8602057 - FixedTecnomatix eBOP Manager Server
Apply the hotfix
https://support.sw.siemens.com/en-US/knowledge- base/PL8602057 - FixedTecnomatix eBOP Manager Server
Apply the hotfix
https://support.sw.siemens.com/en-US/knowledge- base/PL8602057 - FixedValor Parts Library - VPL Direct
Vulnerabilities fixed on remote VPL server; no user actions necessary
- FixedValor Parts Library - VPL Direct
Vulnerabilities fixed on remote VPL server; no user actions necessary
- FixedValor Parts Library - VPL Server or Service
Remove the JndiLookup class from the classpath.
- FixedValor Parts Library - VPL Server or Service
Remove the JndiLookup class from the classpath.
- FixedVeSys V2020.1
Update to V2020.1 SP2202 or later version
https://support.sw.siemens.com/en- US/product/852852123/downloads - FixedVeSys V2020.1
Update to V2020.1 SP2202 or later version
https://support.sw.siemens.com/en- US/product/852852123/downloads - FixedVeSys V2021.1
Update to V2021.1 SP2202 or later version
https://support.sw.siemens.com/en- US/product/852852123/downloads - FixedVeSys V2021.1
Update to V2021.1 SP2202 or later version
https://support.sw.siemens.com/en- US/product/852852123/downloads - FixedXpedition Enterprise (XCR) VX.2.10
Update to VX.2.10 Update 4 or later version
https://support.sw.siemens.com/en-US/product/1644094854/download/2022 01034 - FixedXpedition Enterprise (XCR) VX.2.10
Update to VX.2.10 Update 4 or later version
https://support.sw.siemens.com/en-US/product/1644094854/download/2022 01034 - FixedXpedition Enterprise VX.2.10
Update to VX.2.10 Update 4 or later version
https://support.sw.siemens.com/en-US/product/852852130/download/20220 1033 - FixedXpedition Enterprise VX.2.10
Update to VX.2.10 Update 4 or later version
https://support.sw.siemens.com/en-US/product/852852130/download/20220 1033 - FixedXpedition Enterprise VX.2.6
Apply the hotfix
https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343 - FixedXpedition Enterprise VX.2.6
Apply the hotfix
https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343 - FixedXpedition Enterprise VX.2.7
Update to VX.2.7 Update 19 or later version
https://support.sw.siemens.com/en-US/product/852852130/download/20220 1039 - FixedXpedition Enterprise VX.2.7
Update to VX.2.7 Update 19 or later version
https://support.sw.siemens.com/en-US/product/852852130/download/20220 1039 - FixedXpedition Enterprise VX.2.8
Update to VX.2.8 Update 13 or later version
https://support.sw.siemens.com/en-US/product/852852130/download/20220 1037 - FixedXpedition Enterprise VX.2.8
Update to VX.2.8 Update 13 or later version
https://support.sw.siemens.com/en-US/product/852852130/download/20220 1037 - FixedXpedition IC Packaging (XCR) VX.2.10
Update to VX.2.10 Update 4 or later version
https://support.sw.siemens.com/en-US/product/1644094857/download/2022 01036 - FixedXpedition IC Packaging (XCR) VX.2.10
Update to VX.2.10 Update 4 or later version
https://support.sw.siemens.com/en-US/product/1644094857/download/2022 01036 - FixedXpedition IC Packaging VX.2.10
Update to VX.2.10 Update 4 or later version
https://support.sw.siemens.com/en-US/product/1091814625/download/2022 01035 - FixedXpedition IC Packaging VX.2.10
Update to VX.2.10 Update 4 or later version
https://support.sw.siemens.com/en-US/product/1091814625/download/2022 01035 - FixedXpedition IC Packaging VX.2.6
Apply the hotfix
https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343 - FixedXpedition IC Packaging VX.2.6
Apply the hotfix
https://support.sw.siemens.com/en-US/product/1644094854/knowledge- base/MG618343 - FixedXpedition IC Packaging VX.2.7
Update to VX.2.7 Update 19 or later version
https://support.sw.siemens.com/en-US/product/1091814625/download/2022 01040 - FixedXpedition IC Packaging VX.2.7
Update to VX.2.7 Update 19 or later version
https://support.sw.siemens.com/en-US/product/1091814625/download/2022 01040 - FixedXpedition IC Packaging VX.2.8
Update to VX.2.8 Update 13 or later version
https://support.sw.siemens.com/en-US/product/1091814625/download/2022 01038 - FixedXpedition IC Packaging VX.2.8
Update to VX.2.8 Update 13 or later version
https://support.sw.siemens.com/en-US/product/1091814625/download/2022 01038 - FixedcRSP
Update to V13.17.2 was deployed on all cRSP services on 2021-12-21; no user actions necessary
- FixedcRSP
Update to V13.17.2 was deployed on all cRSP services on 2021-12-21; no user actions necessary
- FixedcRSP Operator Client Starter
Update to V1.7.18 or later version, as provided via cRSP V13.17.2 or later version
- FixedcRSP Operator Client Starter
Update to V1.7.18 or later version, as provided via cRSP V13.17.2 or later version
- FixedjROS for Spectrum Power 4
Update to V4.70 SP9 Security Patch 1 or later version. Please contact your local Siemens representative.
- FixedjROS for Spectrum Power 4
Update to V4.70 SP9 Security Patch 1 or later version. Please contact your local Siemens representative.
- FixedjROS for Spectrum Power 7
Apply the patch. Please contact your local Siemens representative.
- FixedjROS for Spectrum Power 7
Apply the patch. Please contact your local Siemens representative.
Advisories like this name the exposed products attackers go after on your perimeter. See what is exposed on your perimeter with a free passive scan.
Free scan