Rockwell Allen-Bradley MicroLogix, SLC 500, and PLC-5 Fault Generation Vulnerability
This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov
describes (1)
Related CVEs.
| ID | severity | exploitable | ||
|---|---|---|---|---|
| CVE-2012-4690US | high7.1 | — | ||
Rockwell Automation Allen-Bradley MicroLogix controller 1100, 1200, 1400, and 1500; SLC 500 controller platform; and PLC-5 controller platform, when Static status is not enabled, a… | ||||
references
External citations — patches, advisories, analysis.
- ICS Advisory ICSA-12-342-01B JSONself
- Recommended Practicesexternal
- ICS Advisory ICSA-12-342-01B - Web Versionself
- Recommended Practicesexternal
- Recommended Practicesexternal
- Recommended Practicesexternal
- Recommended Practicesexternal
- Recommended Practicesexternal
remediations (6)
- MitigationMicroLogix 1100 Controller
Rockwell Automation recommends the following mitigation strategies to help reduce the likelihood of compromise and the associated security risk. When possible, multiple strategies should be employed simultaneously. If possible, change the controller’s settings to the nonvulnerable state: SLC-500: Set the Status file to “Static”. PLC-5: Enable the Passwords and Privileges feature. Employ layered security and defense-in-depth methods in system design to restrict and control access to individual products and control networks. Refer to (http://www.ab.com/networks/architectures.html) for comprehensive information about implementing validated architectures designed to deliver these measures.
http://www.ab.com/networks/architectures.html - MitigationMicroLogix 1200 controller
Rockwell Automation recommends the following mitigation strategies to help reduce the likelihood of compromise and the associated security risk. When possible, multiple strategies should be employed simultaneously. If possible, change the controller’s settings to the nonvulnerable state: SLC-500: Set the Status file to “Static”. PLC-5: Enable the Passwords and Privileges feature. Employ layered security and defense-in-depth methods in system design to restrict and control access to individual products and control networks. Refer to (http://www.ab.com/networks/architectures.html) for comprehensive information about implementing validated architectures designed to deliver these measures.
http://www.ab.com/networks/architectures.html - MitigationMicroLogix 1400 controller
Rockwell Automation recommends the following mitigation strategies to help reduce the likelihood of compromise and the associated security risk. When possible, multiple strategies should be employed simultaneously. If possible, change the controller’s settings to the nonvulnerable state: SLC-500: Set the Status file to “Static”. PLC-5: Enable the Passwords and Privileges feature. Employ layered security and defense-in-depth methods in system design to restrict and control access to individual products and control networks. Refer to (http://www.ab.com/networks/architectures.html) for comprehensive information about implementing validated architectures designed to deliver these measures.
http://www.ab.com/networks/architectures.html - MitigationMicroLogix 1500 controller
Rockwell Automation recommends the following mitigation strategies to help reduce the likelihood of compromise and the associated security risk. When possible, multiple strategies should be employed simultaneously. If possible, change the controller’s settings to the nonvulnerable state: SLC-500: Set the Status file to “Static”. PLC-5: Enable the Passwords and Privileges feature. Employ layered security and defense-in-depth methods in system design to restrict and control access to individual products and control networks. Refer to (http://www.ab.com/networks/architectures.html) for comprehensive information about implementing validated architectures designed to deliver these measures.
http://www.ab.com/networks/architectures.html - MitigationPLC-5 controller platform PLC-5 Control System
Rockwell Automation recommends the following mitigation strategies to help reduce the likelihood of compromise and the associated security risk. When possible, multiple strategies should be employed simultaneously. If possible, change the controller’s settings to the nonvulnerable state: SLC-500: Set the Status file to “Static”. PLC-5: Enable the Passwords and Privileges feature. Employ layered security and defense-in-depth methods in system design to restrict and control access to individual products and control networks. Refer to (http://www.ab.com/networks/architectures.html) for comprehensive information about implementing validated architectures designed to deliver these measures.
http://www.ab.com/networks/architectures.html - MitigationSLC 500 controller platform
Rockwell Automation recommends the following mitigation strategies to help reduce the likelihood of compromise and the associated security risk. When possible, multiple strategies should be employed simultaneously. If possible, change the controller’s settings to the nonvulnerable state: SLC-500: Set the Status file to “Static”. PLC-5: Enable the Passwords and Privileges feature. Employ layered security and defense-in-depth methods in system design to restrict and control access to individual products and control networks. Refer to (http://www.ab.com/networks/architectures.html) for comprehensive information about implementing validated architectures designed to deliver these measures.
http://www.ab.com/networks/architectures.html
Advisories like this name the exposed products attackers go after on your perimeter. See what is exposed on your perimeter with a free passive scan.
Free scan