Siemens Industrial Products Intel CPUs (Update F)
Intel has published information on vulnerabilities in Intel products in June 2021. This advisory lists the related Siemens Industrial products affected by these vulnerabilities that can be patched by applying the corresponding BIOS update. In this advisory we summarize: - "2021.1 IPU – Intel® CSME, SPS and LMS Advisory" Intel-SA-00459, - "2021.1 IPU – BIOS Advisory" Intel-SA-00463, - "2021.1 IPU – Intel® Processor Advisory" Intel-SA-00464, and - "2021.1 IPU - Intel Atom® Processor Advisory" Intel-SA-00465. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens recommends specific countermeasures for products where fixes are not, or not yet available.
describes (12)
Related CVEs.
| ID | severity | exploitable | ||
|---|---|---|---|---|
| CVE-2020-8704US | medium6.4OT elevated | — | ||
Race condition in a subsystem in the Intel(R) LMS versions before 2039.1.0.0 may allow a privileged user to potentially enable escalation of privilege via local access. | ||||
| CVE-2020-8703US | medium6.7OT elevated | — | ||
Improper buffer restrictions in a subsystem in the Intel(R) CSME versions before 11.8.86, 11.12.86, 11.22.86, 12.0.81, 13.0.47, 13.30.17, 14.1.53, 14.5.32 and 15.0.22 may allow a p… | ||||
| CVE-2020-8670US | medium6.4OT elevated | — | ||
Race condition in the firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access. | ||||
| CVE-2020-24513US | medium6.5OT elevated | — | ||
Domain-bypass transient execution vulnerability in some Intel Atom(R) Processors may allow an authenticated user to potentially enable information disclosure via local access. | ||||
| CVE-2020-24512US | low3.3OT elevated | — | ||
Observable timing discrepancy in some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access. | ||||
| CVE-2020-24511US | medium6.5OT elevated | — | ||
Improper isolation of shared resources in some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access. | ||||
| CVE-2020-24507US | medium4.4OT elevated | — | ||
Improper initialization in a subsystem in the Intel(R) CSME versions before 11.8.86, 11.12.86, 11.22.86, 12.0.81, 13.0.47, 13.30.17, 14.1.53, 14.5.32, 13.50.11 and 15.0.22 may allo… | ||||
| CVE-2020-24506US | medium4.4OT elevated | — | ||
Out of bound read in a subsystem in the Intel(R) CSME versions before 12.0.81, 13.0.47, 13.30.17, 14.1.53 and 14.5.32 may allow a privileged user to potentially enable information… | ||||
| CVE-2020-24486US | medium5.5OT elevated | — | ||
Improper input validation in the firmware for some Intel(R) Processors may allow an authenticated user to potentially enable denial of service via local access. | ||||
| CVE-2020-12360US | high7.8OT elevated | — | ||
Out of bounds read in the firmware for some Intel(R) Processors may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2020-12358US | medium4.4OT elevated | — | ||
Out of bounds write in the firmware for some Intel(R) Processors may allow a privileged user to potentially enable denial of service via local access. | ||||
| CVE-2020-12357US | medium6.7OT elevated | — | ||
Improper initialization in the firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access. | ||||
references
External citations — patches, advisories, analysis.
- SSA-309571: IPU 2021.1 Vulnerabilities in Siemens Industrial Products using Intel CPUs (June 2021) - CSAF Versionself
- SSA-309571: IPU 2021.1 Vulnerabilities in Siemens Industrial Products using Intel CPUs (June 2021) - HTML Versionself
- SSA-309571: IPU 2021.1 Vulnerabilities in Siemens Industrial Products using Intel CPUs (June 2021) - PDF Versionself
- SSA-309571: IPU 2021.1 Vulnerabilities in Siemens Industrial Products using Intel CPUs (June 2021) - TXT Versionself
- ICS Advisory ICSA-21-222-05 JSONself
- Recommended Practicesexternal
- ICS Advisory ICSA-21-222-05 - Web Versionself
- Recommended Practicesexternal
remediations (348)
- MitigationSIMATIC Drive Controller CPU 1504D TF (6ES7615-4DF10-0AB0)
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC Drive Controller CPU 1507D TF (6ES7615-7DF10-0AB0)
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants)
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC Field PG M5
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC Field PG M5
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC Field PG M5
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC Field PG M5
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC Field PG M6
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC Field PG M6
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC Field PG M6
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC Field PG M6
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC Field PG M6
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC Field PG M6
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC Field PG M6
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC Field PG M6
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC127E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC3000 SMART V3
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC3000 SMART V3
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC3000 SMART V3
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC3000 SMART V3
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC3000 SMART V3
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC3000 SMART V3
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC3000 SMART V3
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC3000 SMART V3
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC3000 SMART V3
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC3000 SMART V3
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC3000 SMART V3
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC3000 SMART V3
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC347G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC347G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC347G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC347G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC347G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC347G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC347G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC347G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC347G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC347G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC347G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC347G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC427E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC427E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC427E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC427E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC427E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC427E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC477E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC477E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC477E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC477E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC477E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC477E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC477E Pro
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC477E Pro
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC477E Pro
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC477E Pro
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC477E Pro
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC477E Pro
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC527G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC527G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC527G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC527G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC527G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC547G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC547G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC547G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC547G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC547G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC547G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC547G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC547G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC547G
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC627E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC627E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC627E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC627E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC627E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC627E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC627E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC627E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC647E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC647E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC647E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC647E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC647E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC647E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC647E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC647E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC677E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC677E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC677E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC677E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC677E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC677E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC677E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC677E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC847E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC847E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC847E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC847E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC847E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC847E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC847E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC IPC847E
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC ITP1000
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC ITP1000
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC ITP1000
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC ITP1000
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC ITP1000
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC ITP1000
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP family (incl. SIPLUS variant)
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP family (incl. SIPLUS variant)
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK 828D HW PU.4
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK 828D HW PU.4
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK 828D HW PU.4
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK 828D HW PU.4
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK 828D HW PU.4
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK 828D HW PU.4
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK 828D HW PU.4
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK 828D HW PU.4
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK 828D HW PU.4
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK 828D HW PU.4
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK 828D HW PU.4
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK 828D HW PU.4
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK MC MCU 1720
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK MC MCU 1720
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK MC MCU 1720
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK MC MCU 1720
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK MC MCU 1720
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK MC MCU 1720
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK MC MCU 1720
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK MC MCU 1720
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK MC MCU 1720
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK MC MCU 1720
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK MC MCU 1720
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK MC MCU 1720
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE NCU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE NCU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE NCU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE NCU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE NCU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE NCU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE NCU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE NCU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE NCU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE NCU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE NCU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE NCU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE PPU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE PPU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE PPU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE PPU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE PPU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE PPU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE PPU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE PPU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE PPU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE PPU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE PPU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- MitigationSINUMERIK ONE PPU 1740
As a prerequisite for an attack, an attacker must be able to run untrusted code on affected systems. Siemens recommends limiting the possibilities to run untrusted code if possible.
- No fix plannedSIMATIC Drive Controller CPU 1504D TF (6ES7615-4DF10-0AB0)
Currently no fix is planned
- No fix plannedSIMATIC Drive Controller CPU 1507D TF (6ES7615-7DF10-0AB0)
Currently no fix is planned
- No fix plannedSIMATIC IPC547G
Currently no fix is planned
- No fix plannedSIMATIC IPC547G
Currently no fix is planned
- No fix plannedSIMATIC IPC547G
Currently no fix is planned
- No fix plannedSIMATIC IPC547G
Currently no fix is planned
- No fix plannedSIMATIC IPC547G
Currently no fix is planned
- No fix plannedSIMATIC IPC547G
Currently no fix is planned
- No fix plannedSIMATIC IPC547G
Currently no fix is planned
- No fix plannedSIMATIC IPC547G
Currently no fix is planned
- No fix plannedSIMATIC IPC547G
Currently no fix is planned
- No fix plannedSIMATIC S7-1500 CPU 1518-4 PN/DP MFP family (incl. SIPLUS variant)
Currently no fix is planned
- No fix plannedSIMATIC S7-1500 CPU 1518-4 PN/DP MFP family (incl. SIPLUS variant)
Currently no fix is planned
- No fix plannedSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)
Currently no fix is planned
- No fix plannedSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)
Currently no fix is planned
- FixedSIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants)
Update BIOS to V0209_0105 or later version
https://support.industry.siemens.com/cs/ww/en/view/109743969/ - FixedSIMATIC Field PG M5
Update BIOS to V22.01.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408/ - FixedSIMATIC Field PG M5
Update BIOS to V22.01.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408/ - FixedSIMATIC Field PG M5
Update BIOS to V22.01.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408/ - FixedSIMATIC Field PG M5
Update BIOS to V22.01.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408/ - FixedSIMATIC Field PG M6
Update BIOS to V26.01.08 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC Field PG M6
Update BIOS to V26.01.08 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC Field PG M6
Update BIOS to V26.01.08 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC Field PG M6
Update BIOS to V26.01.08 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC Field PG M6
Update BIOS to V26.01.08 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC Field PG M6
Update BIOS to V26.01.08 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC Field PG M6
Update BIOS to V26.01.08 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC Field PG M6
Update BIOS to V26.01.08 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC127E
Update BIOS to V27.01.07 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC3000 SMART V3
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC3000 SMART V3
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC3000 SMART V3
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC3000 SMART V3
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC3000 SMART V3
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC3000 SMART V3
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC3000 SMART V3
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC3000 SMART V3
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC3000 SMART V3
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC3000 SMART V3
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC3000 SMART V3
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC3000 SMART V3
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC347G
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC347G
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC347G
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC347G
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC347G
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC347G
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC347G
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC347G
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC347G
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC347G
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC347G
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC347G
Update BIOS to V01.04.00 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC427E
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC427E
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC427E
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC427E
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC427E
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC427E
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC477E
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC477E
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC477E
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC477E
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC477E
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC477E
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC477E Pro
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC477E Pro
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC477E Pro
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC477E Pro
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC477E Pro
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC477E Pro
Update BIOS to V21.01.16 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC527G
Update BIOS to V1.4.3 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC527G
Update BIOS to V1.4.3 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC527G
Update BIOS to V1.4.3 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC527G
Update BIOS to V1.4.3 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC527G
Update BIOS to V1.4.3 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC627E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC627E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC627E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC627E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC627E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC627E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC627E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC627E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC647E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC647E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC647E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC647E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC647E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC647E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC647E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC647E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC677E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC677E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC677E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC677E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC677E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC677E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC677E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC677E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC847E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC847E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC847E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC847E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC847E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC847E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC847E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC IPC847E
Update BIOS to V25.02.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC ITP1000
Update BIOS to V23.01.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC ITP1000
Update BIOS to V23.01.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC ITP1000
Update BIOS to V23.01.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC ITP1000
Update BIOS to V23.01.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC ITP1000
Update BIOS to V23.01.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSIMATIC ITP1000
Update BIOS to V23.01.10 or later version
https://support.industry.siemens.com/cs/ww/en/view/109763408 - FixedSINUMERIK 828D HW PU.4
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK 828D HW PU.4
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK 828D HW PU.4
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK 828D HW PU.4
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK 828D HW PU.4
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK 828D HW PU.4
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK 828D HW PU.4
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK 828D HW PU.4
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK 828D HW PU.4
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK 828D HW PU.4
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK 828D HW PU.4
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK 828D HW PU.4
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK MC MCU 1720
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK MC MCU 1720
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK MC MCU 1720
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK MC MCU 1720
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK MC MCU 1720
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK MC MCU 1720
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK MC MCU 1720
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK MC MCU 1720
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK MC MCU 1720
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK MC MCU 1720
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK MC MCU 1720
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK MC MCU 1720
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE / SINUMERIK 840D sl Handheld Terminal HT 10
Update BIOS to V08.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE NCU 1740
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE NCU 1740
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE NCU 1740
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE NCU 1740
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE NCU 1740
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE NCU 1740
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE NCU 1740
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE NCU 1740
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE NCU 1740
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE NCU 1740
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE NCU 1740
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE NCU 1740
Update BIOS to V05.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE PPU 1740
Update BIOS to V06.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE PPU 1740
Update BIOS to V06.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE PPU 1740
Update BIOS to V06.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE PPU 1740
Update BIOS to V06.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE PPU 1740
Update BIOS to V06.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE PPU 1740
Update BIOS to V06.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE PPU 1740
Update BIOS to V06.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE PPU 1740
Update BIOS to V06.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE PPU 1740
Update BIOS to V06.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE PPU 1740
Update BIOS to V06.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE PPU 1740
Update BIOS to V06.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
- FixedSINUMERIK ONE PPU 1740
Update BIOS to V06.00.00.00 or later version SINUMERIK software can be obtained from your local Siemens account manager.
Advisories like this name the exposed products attackers go after on your perimeter. See what is exposed on your perimeter with a free passive scan.
Free scan